From DD-WRT Wiki
[edit] Read Me First!
[edit] About this list
This page lists and compares all devices that are known to work with DD-WRT, some of them are not yet supported but are a work-in-progress (WIP).
If you don't find your hardware below, it probably isn't supported yet and you risk breaking it. See Known incompatible devices for the black list, or refer to Router detection to determine whether or not support can be added in the future.
[edit] Broadcom and ADM FAQ
[edit] Which version may I flash?
See Which v24 build do I flash onto my Broadcom router?.
[edit] 2MB flash
On devices with only 2MB flash memory, only the micro version of DD-WRT is supported. This is a stripped-down firmware with only the basic features to fit in the limited space. Users should not expect to be able to install additional software packages on such devices. Because of the limited features of the micro version, users are strongly recommended to avoid buying devices with only 2 MB of flash memory.
The 2MB flash support is for Broadcom based routers only, all other platforms requires at least 4MB flash!
Despite the limitations of micro version compared to the full version, if you already own a device with 2 MB of flash memory, installing the micro DD-WRT version is likely to add additional functionality that your device's original firmware did not support.
[edit] 4MB flash
With 4MB of flash you can run the standard build (Linux kernel 2.4) or the small build (Linux kernel 2.6).
These builds are usually enough for the majority of users but anyone who intend to load additional software packages on their router should get a router with 8MB or more of flash memory.
Do not flash the Mega build on devices with 4MB flash memory. Mega requires 8 or more MB flash.
[edit] 8MB flash or more
You can flash the Mega, Big, or standard++ builds that are bigger than 4MB. Check the tables below for support.
[edit] Atheros, Ralink and any other FAQ
These devices have special builds only for using on the respective unit. There are NO other builds existing as the ones in the specific folder for the unit.
[edit] 2MB flash
Not supported by dd-wrt, Atheros and Ralink builds needs at least 4MB of flash.
[edit] 4MB flash
Atheros and Ralink builds are not prefixed with mini, small, std, or mega. 4MB is usually enough for basic dd-wrt functions but there are a few routers where certain functions had to be removed due to space limitations.
[edit] 8MB flash or more
This is the flash size needed for those users who intend to load additional software packages on their router or want to run a build compiled with additional functionality.
[edit] HOWTO/FAQ to the Comparison Table
- Please keep it simple to administer for all users! One line, one device! NO rowspanning stuff!
- WIP = Work In Progress (Located under version). Sometimes we need the hardware to do the port. So feel free to contact Sash via e-mail and provide us with the hardware so we can get this started!
- NO static linking to DD-WRT firmware releases, they get old very fast!
- NO static linking to manufacturers product page, they only work until the mfgr reorganizes his web site!
- This table is a work-in-progress and likely contains errors and omissions, please update it as needed and fill in the blanks if you can.
[edit] Supported Devices
Model
| H.W. rev
| FCC ID
| Platform & Frequency [MHz]
| RAM [MB]
| Flash [MB]
| Wireless NIC
| WLAN standard [802.11]
| mini PCI
| Serial port
| JTAG port
| Eth. port count
| Volt. Input [V/A]
| Special Features Notes
| min required DD-WRT version
| Notes for Running DD-WRT
|
3CRWER100-75
| ?
| O9C-WL537
| Atheros AR2315@180
| 16
| 4
| Atheros
| b/g
| -
| 1
| 1
| 4 LAN 1 WAN
| 12V 1.25A
|
| WIP - 3CRWER100 v.24 pre sp2 - build ?
| ?
|
[edit] Abocom
Model
| H.W. rev
| FCC ID
| Platform & Frequency [MHz]
| RAM [MB]
| Flash [MB]
| Wireless NIC
| WLAN standard [802.11]
| mini PCI
| Serial port
| JTAG port
| Eth. port count
| Volt. Input [V/A]
| Special Features Notes
| min required DD-WRT version
| Notes for Running DD-WRT
|
WAP2102
| ?
| MQ4WAP2102
| Atheros AR2317@180
| 16
| 4
| Atheros
| b/g
| -
| ?
| -
| 1 LAN or WAN
| 3,3V / 1,5A
| = Planex GW-MF54G2
| MF54G2 v.24 pre sp2 - build 12110
| ?
|
[edit] Accton
Model
| H.W. rev
| FCC ID
| Platform & Frequency [MHz]
| RAM [MB]
| Flash [MB]
| Wireless NIC
| WLAN standard [802.11]
| mini PCI
| Serial port
| JTAG port
| Eth. port count
| Volt. Input [V/A]
| Special Features Notes
| min required DD-WRT version
| Notes for Running DD-WRT
|
MR3201A
| ?
| HED-MR3201A
| Atheros AR2315@180
| 16
| 8
| Atheros
| b/g
| -
| 1
| Y
| 1 WAN or LAN
| 5V 2A
| =Fon 2100
| FON version
| Flashing procedure
|
MR3202a
| -
| HEDMR3202A
| Atheros AR2317@180
| 16
| 8
| Atheros
| b/g
| -
| ?
| ?
| 1 WAN 1 LAN
| 5V 2A
| ?
| v24 rc2
| ?
|
Model
| H.W. rev
| FCC ID
| Platform & Frequency [MHz]
| RAM [MB]
| Flash [MB]
| Wireless NIC
| WLAN standard [802.11]
| mini PCI
| Serial port
| JTAG port
| Eth. port count
| Volt. Input [V/A]
| Special Features Notes
| min required DD-WRT version
| Notes for Running DD-WRT
|
NR22/Y
| -
| IFA-NRXX
| Ralink RT3052F@380
| 32
| 4
| Ralink
| b/g/n
| -
| 1
| -
| 4 LAN 1 WAN
| 9V/1A
|
| NR22 v.24SP2 - build 12826 - 20090904
|
|
Model
| H.W. rev
| FCC ID
| Platform & Frequency [MHz]
| RAM [MB]
| Flash [MB]
| Wireless NIC
| WLAN standard [802.11]
| mini PCI
| Serial port
| JTAG port
| Eth. port count
| PoE
| Volt. Input [V/A]
| Special Features Notes
| min required DD-WRT version
| Notes for Running DD-WRT
|
MI424WR
| A
| LNQ802MRG
| Xscale IXP425@533
| 32
| 8
| depends on card
| ralink b/g (must be replaced)
| 1
| 1
| 1
| 4 LAN 1 WAN
| ?
| 5V (max 9v) / 3A
| OEM'd to Verizon, FIOS port will not work
| v.24 sp2 - build 12646 - 13/08/09
| MI424WR
|
MI424WR
| C
| LNQ802MAG
| Xscale IXP425@533
| 32
| 8
| depends on card
| Atheros b/g
| 1
| 1
| 1
| 4 LAN 1 WAN
| -
| 5V / 3A
| OEM'd to Verizon, FIOS port will not work
| v.24 sp2 - build 12646 - 13/08/09
| MI424WR
|
MI424WR
| D
| LNQ802MAG
| Xscale IXP425@533
| 32
| 8
| depends on card
| b/g
| 1
| 1
| -
| 4 LAN 1 WAN
| -
| 5V / 3A
| OEM'd to Verizon, FIOS port will not work
| v.24 sp2 - build 12646 - 13/08/09
| MI424WR
|
Model
| H.W. rev
| FCC ID
| Platform & Frequency [MHz]
| RAM [MB]
| Flash [MB]
| Wireless NIC
| WLAN standard [802.11]
| mini PCI
| Serial port
| JTAG port
| Eth. port count
| PoE
| Volt. Input [V/A]
| Special Features Notes
| min required DD-WRT version
| Notes for Running DD-WRT
|
Coyote
| -
| ?
| Xscale IXP425@533
| 64- 128
| 16- 32
| -
| depends on card
| 2
| 1
| 1
| 4 LAN 1 WAN
| ?
| ?
| hw watchdog, temp. and volt. sensor, opt adsl annex a-c, usb 1.1, pata, 2x pots
| v24 RC5 - kernel support
| board donation needed for port
|
Pronghorn SBC 210
| -
| ?
| Xscale IXP420@266
| 32
| 8
| -
| depends on card
| 2
| 1
| ?
| 1 LAN
| 802.3af
| 5, 10- 30
| CF socket, hw watchdog, temp. and volt. sensor
| v24 pronghorn-SBC - Build 9917
| needs activation
|
Pronghorn Metro SBC
| -
| ?
| Xscale IXP425@533
| 64
| 16
| -
| depends on card
| 4
| 1
| ?
| 1 LAN, 1 WAN
| yes
| 17- 30 & 36- 60
| CF socket, hw watchdog, temp. and volt. sensor
| v24 pronghorn-SBC - Build 9917
| needs activation
|
Model
| H.W. rev
| FCC ID
| Platform & Frequency [MHz]
| RAM [MB]
| Flash [MB]
| Wireless NIC
| WLAN standard [802.11]
| mini PCI
| Serial port
| JTAG port
| Eth. port count
| Volt. Input [V/A]
| Special Features Notes
| min required DD-WRT version
| Notes for Running DD-WRT
|
AR335W
| ?
| RRK-AR335W
| Atheros AR2317@182
| 16
| 4
| Atheros
| b/g
| -
| ?
| 1
| 4 LAN 1 WAN
| 5V / 1.2A
| clone of dir-300
| v24 rc5
| install like dir-300
|
AR430W
| V1
| RRK-AR430W
| Atheros AR2318@182
| 16
| 4
| Atheros
| b/g
| -
| 1
| 1
| 4 LAN 1 WAN
| 12V / 1A 5V / 1A auto- sensed
| clone of dir-300
| V24 RC5
| [1]
|
AP431W
| ?
| RRK-AP431W
| Atheros AR2313A@180
| 16
| 4
| Atheros
| b/g
| -
| 1
| 1
| 1LAN
| 12V / 1A
| DWL 2100 clone, but running redboot?
| WIP
|
|
AR670W
| ?
| RRK-WRGN16
| Ralink RT2880F@266
| 32
| 4
| Ralink RT2820L
| b/g/n
| has pads
| 1
| 1
| 4 LAN 1 WAN
| 5V / 2A
|
| v24 Pre sp2 - build 12861
|
|
AR690W
| ?
| RRK-WRGN20
| Ralink RT2880F@266
| 32
| 4
| Ralink RT2820L
| b/g/n
| -
| 1
| ?
| 4 LAN 1 WAN
| 5V / 3A
| GBit switch
| v24 Pre sp2 - build 15695
|
|
Model
| H.W. rev
| FCC ID
| Platform & Frequency [MHz]
| RAM [MB]
| Flash [MB]
| Wireless NIC
| WLAN standard [802.11]
| mini PCI
| Serial port
| JTAG port
| Eth. port count
| PoE
| Transmit Power
| Volt. Input [V/A]
| Special Features Notes
| min required DD-WRT version
| Notes for Running DD-WRT
|
Airmax 5
| ?
| ?
| Atheros AR2312@180?
| 32
| 8
| Atheros AR5112A SoC?
| a/b/g/n @ 20dBm?
| ?
| 1?
| ?
| 2 LAN? 1 WAN
| 802.3af?
| ?
| 5V 2A?
| outdoor encl. w. 14dBi dual pol ant.
| v.24 sp2 - build 11803
| activation needed
|
IGR-2500
| ?
| ?
| IXP425 @ 533
| 128
| 4
| -
| -
| ?
| 1
| ?
| 2 LAN, 5 WAN
| -
| ?
| ?
| -
| board needed for port -> pm Sash
|
|
RS-1200
| ?
| ?
| IXP425 @ 266
| 32
| 8
| -
| -
| ?
| 1
| ?
| 2 LAN, 2 WAN
| -
| ?
| ?
| -
| board needed for port -> pm Sash
|
|
WHA-5500CPE
| ?
| ?
| Atheros AR2312@180
| 32
| 4
| Atheros AR5112A SoC
| a/b/g/h @ 20dBm
| ?
| 1
| ?
| 2 LAN 1 WAN
| 802.3af
| ?
| 5V 2A
| outdoor encl. w. 18dBi ant.
| wha- 5500cpe v.24 rc7 - build 9414
| activation needed
|
WHA-5500CPE-NT
| ?
| ?
| Atheros AR2312@180
| 32
| 4
| Atheros AR5112A SoC
| a/b/g/h @ 20dBm
| ?
| 1
| ?
| 1 LAN WAN
| 802.3af
| ?
| 5V 2A
| outdoor encl.
| wha- 5500cpe v.24 rc7 - build 9414
| activation needed
|
WLA-5000
| ?
| ?
| Atheros AR2312@180
| 32
| 4
| Atheros AR5112A SoC
| a/b/g/h @ 20dBm
| ?
| 1
| ?
| 1 LAN WAN
| 802.3af
| ?
| 5V 2A
| -
| WLA- 5000ap v.24 rc7 - build 9414
| activation needed
|
WLA-9000ap
| ?
| ?
| Atheros AR5312@220
| 32
| 8
| Atheros
| a/b/g @ 23dBm
| ?
| 1
| ?
| 2 LAN 1 WAN
| 802.3af
| ?
| 5.5V 2.5A
| -
| WLA- 9000ap v.24 SP2 - build 11003
| activation needed
|
Model
| H.W. rev
| FCC ID
| Platform & Frequency [MHz]
| RAM [MB]
| Flash [MB]
| Wireless NIC
| WLAN standard [802.11]
| mini PCI
| Serial port
| JTAG port
| Eth. port count
| PoE
| Transmit Power
| Volt. Input [V/A]
| Special Features Notes
| min required DD-WRT version
| Notes for Running DD-WRT
|
Solo48 (AP48)
| ?
| ?
| Atheros AR2313@180
| 32
| 8
| Atheros
| a/b/g/h @ 30dBm
| ?
| 1
| ?
| 2 WAN LAN
| passive poe
| ?
| 18
| outdoor enclosure w. dual pol. 18dBi panel
| alfa v.24 SP2 - build
| activation needed
|
AIP-W502U
| ?
| ?
| Atheros AR9130@400 ?
| 32?
| 8?
| Atheros AR9102 2x2 MIMO?
| b/g/n?
| -
| Yes
| Yes
| 4 LAN 1 WAN
| -
| ?
| 12 1
| USB
| W502U v.24 SP2 - build 13845 - 20100206
|
|
Model
| H.W. rev
| FCC ID
| Platform & Frequency [MHz]
| RAM [MB]
| Flash [MB]
| Wireless NIC
| WLAN standard [802.11]
| mini PCI
| Serial port
| JTAG port
| Eth. port count
| PoE
| Transmit Power
| Volt. Input [V/A]
| Special Features Notes
| min required DD-WRT version
| Notes for Running DD-WRT
|
ALL0258
| -
| -
| Atheros AR2313@180
| 32
| 8
| 1
| AR5112 a/b/g @ 28dbm
| -
| 1
| ?
| 1 LAN
| yes
| ?
| 12V 1A
| Int. 5dBi 2.4GHz + 13dBi 5GHz Panel Ant. + 2x Ext. SMA
| EOC-5610 v.24 SP2 - build 11772
| EOC-5610 clone, needs DD-WRT activation, install micro-redboot 1st
|
All0277
| -
|
| Broadcom BCM4702@125
| 16
| 4
| Broadcom
| b/g
| 1
| -
| yes
| 4 LAN 1 WAN
| -
| ?
| 5V
| same hardware as wrt54g v1
| v22
| ?
|
All0285
| ?
| ?
| Atheros 2312a@180
| 16
| 4
| Atheros
| b/g
| -
| 1
| 1
| 1 LAN
| -
| ?
| 5V 1.2A
| same hardware as dwl2100
| WIP
| ?
|
ALL02762
| -
| -
| Broadcom BCM5354@240
| 16
| 4
| 1
| b/g
| -
| -
| 1
| 4 LAN 1 WAN
| -
| ?
| 5V
|
| v.24 SP2 - build 10411 - 20080919
| ships with pre- installed DD-WRT
|
ALL391AP
| -
| ?
| Xscale IXP420@266
| 32
| 8
| Atheros
| 1x a/b/g/n
| 4
| 1
| Yes
| 1 LAN 1 WAN
| yes
| ?
| 9- 48
| h.w. watchdog, temp. and volt. sensor, usb, outdoor encl.
| v24 - avila build
| needs DD-WRT activation
|
ALL392BR
| -
| ?
| Xscale IXP420@266
| 32
| 8
| Atheros
| 2x a/n @ 30dBm
| 4
| 1
| Yes
| 1 LAN 1 WAN
| yes
| ?
| 9- 48
| h.w. watchdog, temp. and volt. sensor, usb, outdoor encl.
| v24 - avila build
| needs DD-WRT activation
|
ALL392MAP
| -
| ?
| Xscale IXP420@266
| 32
| 8
| Atheros
| 1x a/n @ 30dBm, 1x a/b/g/n
| 4
| 1
| Yes
| 1 LAN 1 WAN
| yes
| ?
| 9- 48
| h.w. watchdog, temp. and volt. sensor, usb, outdoor encl.
| v24 - avila build
| needs DD-WRT activation
|
ALL392MRAP
| -
| ?
| Xscale IXP420@400
| 32
| 8
| Atheros
| 2x a/n @ 30dBm
| 4
| 1
| Yes
| 1 LAN 1 WAN
| yes
| ?
| 9- 48
| h.w. watchdog, temp. and volt. sensor, usb, outdoor encl.
| v24 - avila build
| needs DD-WRT activation
|
Model
| H.W. rev
| FCC ID
| Platform & Frequency [MHz]
| RAM [MB]
| Flash [MB]
| Wireless NIC
| WLAN standard [802.11]
| mini PCI
| Serial port
| JTAG port
| Eth. port count
| PoE
| Transmit Power
| Volt. Input [V/A]
| Special Features Notes
| min required DD-WRT version
| Notes for Running DD-WRT
|
ID-2
| -
|
| Atheros AR710@680
| 64
| 16
| -
| 2x a/b/g/h
| 3
| 1
| yes
| 3 LAN WAN
| yes
| ?
| 5- 24
| = UBNT RouterStation
| RS v24SP2 - build 10907
| needs DD-WRT activation
|
OD-2
| -
|
| Atheros AR710@680
| 64
| 16
| -
| 2x a/b/g/h
| 3
| 1
| yes
| 3 LAN WAN
| yes
| ?
| 5- 24
| = UBNT RouterStation w. outdoor enclosure
| RS v24SP2 - build 10907
| needs DD-WRT activation
|
OMW
| -
|
| Atheros AR710@680
| 64
| 16
| -
| depends on card
| 3
| 1
| yes
| 3 LAN WAN
| yes
| ?
| 5- 24
| = UBNT RouterStation
| RS v24SP2 - build 10907
| needs DD-WRT activation
|
AWR-100
| -
|
| Atheros AR710@680
| 64
| 16
| -
| depends on card
| 3
| 1
| yes
| 3 LAN WAN
| yes
| ?
| 5- 24
| = UBNT RouterStation
| RS v24SP2 - build 10907
| needs DD-WRT activation
|
Model
| H.W. rev
| FCC ID
| Platform & Frequency [MHz]
| RAM [MB]
| Flash [MB]
| Wireless NIC
| WLAN standard [802.11]
| mini PCI
| Serial port
| JTAG port
| Eth. port count
| PoE
| Volt. Input [V/A]
| Special Features Notes
| min required DD-WRT version
| Notes for Running DD-WRT
|
MaxR-7100
| -
| ?
| Atheros AR7130@300
| 32
| 8
| -
| depends on card
| 1
| 1
| 1
| 2 LAN WAN
| yes
| 12 - 18V
| hw watchdog, temp, 2 usb
|
|
|
MaxR-7200
| -
| ?
| Atheros AR7161@680
| 64
| 8
| -
| depends on card
| 2
| 1
| 1
| 4 LAN 1 WAN
| yes
| 8- 12V & 9- 48V
| hw watchdog, 2 usb
|
|
|
MaxR-7300
| -
| ?
| Atheros AR7161@680
| 64
| 8
| -
| depends on card
| 3
| 1
| 1
| 4 LAN 1 WAN
| yes
| 8- 12V & 9- 48V
| hw watchdog, 2 usb
|
|
|
Model
| H.W. rev
| FCC ID
| Platform & Frequency [MHz]
| RAM [MB]
| Flash [MB]
| Wireless NIC
| WLAN standard [802.11]
| mini PCI
| Serial port
| JTAG port
| Eth. port count
| Volt. Input [V/A]
| Special Features Notes
| min required DD-WRT version
| Notes for Running DD-WRT
|
RT210W
| -
| H8N-RT210W
| Broadcom BCM4710@125
| 16
| 4
| Broadcom
| b/g
| 1
| -
| ?
| 4 LAN 1 WAN
| 5V 2A
| same hw: Gigaset SE505 v1
| v23?
| initial flash: use Tftp flash
|
RT480W
| -
| H8NRT480W
| Broadcom BCM4712@200
| 8
| 4
| Broadcom
| b/g
| -
| ?
| ?
| 4 LAN 1 WAN
| 12V 1A
| ?
| v24 micro
| initial flash: use Tftp flash
|
RT2100W
| RT2100W-D65
| -
| Broadcom BCM4710@125
| ?
| ?
| Broadcom
| b/g
| ?
| ?
| ?
| ?
| ?
| ?
| v24
| initial flash: use Tftp flash
|
RT220XD
| -
| ?
| Broadcom BCM4704@264
| 16
| 4
| Broadcom
| b/g
| ?
| -
| ?
| 4 LAN 1 WAN
| ?
| ?
| v.24 rc7 - build 9364
| initial flash: use Tftp flash
|
RT2206D?
| RT2206D-D56
| -
| Broadcom BCM4704@264
| 16
| 4
| Broadcom
| b/g
| ?
| ?
| ?
| ?
| ?
| ?
| v24
| initial flash: use Tftp flash
|
WARNING: It is recommended to use ASUS Firmware restoration tool for ASUS routers initial flash (use *.TRX file)
Model
| H.W. rev
| FCC ID
| Platform & Frequency [MHz]
| RAM [MB]
| Flash [MB]
| Wireless NIC
| WLAN standard [802.11]
| mini PCI
| Serial port
| JTAG port
| Eth. port count
| Volt. Input [V/A]
| Special Features Notes
| min required DD-WRT version
| Notes for Running DD-WRT
|
RT-G32
| A
| MSQRTG32
| Atheros AR2317@180
| 16
| 4
| Atheros
| b/g
| -
| ?
| 1
| 4 LAN 1 WAN
| 12V 1A
| -
| v24 SP2 - build 13499 - 20091222
| -
|
RT-G32
| B1
| MSQ-RTG32
| Ralink RT3052@380
| 16
| 4
| Ralink
| b/g/n
| -
| 1
| -
| 4 LAN 1 WAN
| 12V 1A
| -
| wip
| -
|
RT-N10
| -
| MSQ-RTN10
| Broadcom BCM5356@300
| 16
| 4
| Broadcom
| b/g/n
| -
| Yes
| Yes
| 4 LAN 1 WAN
| 9V 1A
| -
| v24 SP2 - build 13661 - 20100118
| need to put tx rx antenna to right for wireless to work, still unstable
|
RT-N10+
| B1
| MSQRTN10B
| RT3050F@384
| 32
| 4
| Ralink
| b/g/n
| -
| 1
| 1
| 4 LAN 1 WAN
| 12V 0.5A
| -
| v24sp2 v15429 20101011
| -
|
RT-N10U
| -
| MSQ-RTN10U
| Broadcom BCM5357@300
| 32
| 8
| Broadcom
| b/g/n
| -
| Yes
| Yes
| 4 LAN 1 WAN
| 12V 1A
| 1 x USB 2.0
| v24 SP2 - build 16994 - 20110508
|
|
RT-N10U_BLACK
| -
| MSQ-RTN10UB
| Broadcom BCM5357@300
| 32
| 8
| Broadcom
| b/g/n
| -
| Yes
| Yes
| 4 LAN 1 WAN
| 12V 1A
| 1 x USB 2.0
| v24 SP2 - build 16994 - 20110508
|
|
RT-N12
| -
| MSQ-RTN12
| Broadcom BCM4716@300
| 32
| 4
| Broadcom
| b/g/n
| -
| Yes
| Yes
| 4 LAN 1 WAN
| 12V 1A
| -
| v.24SP2 - build 13480 - 20091217
| -
|
RT-N12
| B
| MSQ-RTN12B
| Broadcom BCM5357@300
| 32
| 4
| Broadcom
| b/g/n
| -
| Yes
| Yes
| 4 LAN 1 WAN
| 12V 1A
| -
| K26 build 16754 - 20110409
| -
|
RT-N13
| -
| MSQ-RTN13
| Ralink RT2880@266
| 32
| 4
| Ralink
| b/g/n
| -
| yes
| -
| 4 LAN 1 WAN
| 5V 2.5A
| -
| board needed for port -> pm Sash
| -
|
RT-N13U
| -
| MSQ-RTN13U
| Ralink RT3052@380
| 32
| 4
| Ralink
| b/g/n
| -
| yes
| -
| 4 LAN 1 WAN
| 12V 1A
| 1 USB 2.0
| v.24 SP2 - build 14594 - 20100612
| ext3 addon to run optware
|
RT-N13U
| B
| MSQ-RTN13U
| Ralink RT3052@380
| 64
| 8
| Ralink
| b/g/n
| -
| yes
| -
| 4 LAN 1 WAN
| 12V 1A
| 1 USB 2.0
| ?
| -
|
RT-N15
| -
| MSQ-RTN15
| Ralink RT2880@266
| 32
| 4
| Ralink
| b/g/n
| -
| Yes
| -
| 4 GBit LAN 1 GBit WAN
| 5V 2.5A
| -
| v.24 SP2 - build 16023 - 20110113
| -
|
RT-N16
| -
| MSQRTN16
| Broadcom BCM4718@480
| 128
| 32
| Broadcom
| b/g/n
| -
| Yes
| Yes
| 4 GBit LAN 1 GBit WAN
| 12V 1.25A
| 2 USB 2.0
| v24K26 sp2 - build 13297
| for initial flash Asus RT-N16 now supported
|
WL-300g
| -
| MSQWL300G
| Broadcom BCM4710@125
| 16
| 4
| Broadcom
| b/g
| -
| -
| ?
| 1 LAN
| 5V 2A
| -
| v24
| initial flash via Asus tool,
VINTage firmware needed.
|
WL-330gE
| -
| MSQWL330GE
| Broadcom BCM5354r2@240
| 16
| 4
| Broadcom
| b/g
| 1
| -
| ?
| 1 LAN
| 5V 1A
| -
| dd-wrt.v24 - 10633 - NEWD - mini.bin
| initial flash via Asus tool,
[2] needed.
|
WL-330N3G
| -
| MSQ-WL330N3G
| Ralink RT3050F@320
| 32
| 4
| Ralink SOC
| b/g/n
| -
| -
| -
| 1 LAN
| 5V 2A
| 1 USB
| board needed for port
| -
|
WL-500b
| -
| MSQWL500B
| Broadcom BCM4710@125
| 16
| 4
| Broadcom
| b (maybe wlan must be replaced to work)
| 1
| -
| 1
| 4 LAN 1 WAN
| 5V 2A
| 1 USB 1 LPT
| v23 SP2
| initial flash via Asus tool
|
WL-500g
| -
| MSQWL500G
| Broadcom BCM4710@125
| 16
| 4
| Broadcom
| b/g
| 1
| -
| 1
| 4 LAN 1 WAN
| 5V 2A
| 1 USB 1 LPT
| v23 SP2
| initial flash via Asus tool
|
WL-500g Deluxe
| -
| MSQWL500GD
| Broadcom BCM5365@200
| 32
| 4
| Broadcom
| b/g
| -
| 1
| ?
| 4 LAN 1 WAN
| 5V 2A
| 2 USB 2.0
| v23 SP2
| initial flash via Asus tool, tftp, or web interface
|
WL-500gP
| -
| MSQWL500GP
| Broadcom BCM4704@264
| 32
| 8
| Broadcom
| b/g
| 1
| 1
| ?
| 4 LAN 1 WAN
| 5V 2.5A
| 2 USB
| v23 SP3
| initial flash via Asus tool
|
WL-500gP V2
| v2
| MSQWL500GP V2
| Broadcom BCM5354@240
| 32
| 8
| Broadcom BCM4318
| b/g
| -
| 1
| ?
| 4 LAN 1 WAN
| 5V 2.5A
| 2 USB
| v24 rc7 - build 9264
| initial flash via Asus tool; or via tftp
|
WL-500W
| -
| MSQWL500W
| Broadcom BCM4704@264
| 32
| 8
| Broadcom
| b/g/n
| 1
| 1
| No
| 4 LAN 1 WAN
| 5V 2.5A
| 2 USB
| v24 RC3
| initial flash via Asus tool
|
WL-520g
| -
| MSQWL520G
| Broadcom BCM5350@200
| 8
| 2
| Broadcom
| b/g
| ?
| Yes
| ?
| 4 LAN 1 WAN
| 9V 0.8A
| -
| V24-SP1 micro
| initial flash via web interface
|
WL-520gC
| -
| MSQWL520GUGC
| Broadcom BCM5354@240
| 16
| 2
| Broadcom
| b/g
| ?
| -
| ?
| 4 LAN 1 WAN
| 5V 2A
| -
| v24 micro build 8257
| initial flash via Asus tool
|
WL-520gU
| -
| MSQWL520GUGC
| Broadcom BCM5354@240
| 16
| 4
| Broadcom
| b/g
| No
| Yes
| No
| 4 LAN 1 WAN
| 5V 2A
| 1 USB 2.0
| v24
| initial flash via Asus tool
|
WL-550gE
| -
| MSQWL550GE
| Broadcom BCM5352@200
| 16
| 4
| Broadcom
| b/g
| ?
| -
| -
| 4 LAN 1 WAN
| 5V 2A
| 2 USB 1.1 (Requires soldering header)
| v23 SP2
| initial flash via Asus tool
|
WL-700gE
| ?
| ?
| Broadcom BCM4780@266
| 64
| 2
| Broadcom
| b/g
| ?
| ?
| ?
| 4 LAN 1 WAN
| 12V 3A Max
| 3 USB 2.0, 3.5" 250 GB internal hard drive, possible to use a partition as flash memory
| ?
| ?
|
WARNING: Always use TFTP to flash Belkin routers if at all possible! Upgrading dd-wrt from the web interface can lead to a bricked (nonfunctional) unit!
Model
| H.W. rev
| FCC ID
| Platform & Frequency [MHz]
| RAM [MB]
| Flash [MB]
| Wireless NIC
| WLAN standard [802.11]
| mini PCI
| Serial port
| JTAG port
| Eth. port count
| Volt. Input [V/A]
| Special Features Notes
| min required DD-WRT version
| Notes for Running DD-WRT
|
F5D7130
| -
| K7SF5D7130
| Broadcom BCM4710@125
| 8
| 2
| Broadcom mini PCI
| b/g
| 1
| -
| 1
| 1 LAN or WAN
| 5V 2A
| Wireless G Acess Point
| must use VINT micro build
|
|
F5D7130
| v2xxx
| K7SF5D7130A
| Broadcom BCM4710@125
| 8
| 2
| Broadcom mini PCI
| b/g
| 1
| -
| 1
| 1 LAN or WAN
| 5V 2A
| Wireless G Acess Point
| must use VINT micro build
| initial flash: use Tftp flash
|
F5D7130uk
| v3xxx
| -
| Broadcom BCM4712@200
| 8
| 2
| Broadcom
| b/g
| -
| -
| 1
| 1 LAN or WAN
| 5V 2A
| Wireless G Acess Point
| micro
| initial flash: use Tftp flash
|
F5D7130-4
| 1010 1112
| QDS-BRCM1005
| Broadcom BCM4710@125
| 8
| 2
| Broadcom mini PCI
| b/g
| 1
| -
| 1
| 4 LAN 1 WAN
| 5V 2A
|
| must use VINT micro build
| always use Tftp flash
|
F5D7230-4
| 1000 1010 1111 1112 1222de 1223df 1223ef 1232a
| H8N-RT210W (1000), QDS-BRCM1005 (1112 1223ef 1232a)
| Broadcom BCM4710@125
| 16
| 4
| Broadcom mini PCI
| b/g
| 1
| 1
| 1
| 4 LAN 1 WAN
| 5V 2A
|
| Must use VINT build (same hw as Gigaset SE505 v1)
| always use Tftp flash
see also TFTP Flashing a Belkin F5D7230
see also Firmware must be less than 3.5 MB
|
F5D7230-4
| 1000fr 1444
| K7SF5D7230-4
| Broadcom BCM4712@200
| 8
| 2
| Broadcom
| b/g
| yes
| 1
| 1
| 4 LAN 1 WAN
| 5V 2A
| USB 1.1 mod
| v23 sp2 micro
| always use Tftp flash
|
F5D7230-4
| 2000 2000de
| K7SF5D7234A (v2000)
| Broadcom BCM4712@200
| 8
| 2
| Broadcom
| b/g
| -
| 1
| 1
| 4 LAN 1 WAN
| 5V 2A
| USB 1.1 mod
| "serial flash" device, Must use SF build
| v2000 specific: Important Notes
|
F5D7230-4
| 3000
| PD5F5D72304
| Broadcom BCM5350@200
| 8
| 2
| Broadcom
| b/g
| -
| 2
| 1
| 4 LAN 1 WAN
| 7.5V 1A
|
| v.24 - build 10018
| initial flash: use Tftp flash
|
F5D7231-4
| v10xx
| K7SF5D72304
| Broadcom BCM4712@200
| 8
| 2
| Broadcom
| b/g
| -
| ?
| -
| 4 LAN 1 WAN
| 5V 2A
| read this
and this
| v24 RC-5 (11/22/07) micro
| initial flash: use Tftp flash
|
F5D7231-4
| v11xx
| K7SF5D7234A
| Broadcom BCM4712@200
| 8
| 2
| Broadcom
| b/g
| -
| 1
| 1
| 4 LAN 1 WAN
| 5V 2A
| USB 1.1 mod
| "serial flash" device, Must use SF build
| initial flash: use Tftp flash
|
F5D7231-4
| v12xx
| H8NRT2406W
| Broadcom BCM5352@200
| 8
| 2
| Broadcom
| b/g
| -
| ?
| ?
| 4 LAN 1 WAN
| 5V 2A
| -
| v24 RC4 micro
| initial flash: use Tftp flash
|
F5D7231-4
| v2xxx
| K7SF5D7231B
| Broadcom BCM5352@200
| 8
| 2
| Broadcom
| b/g
| -
| 1
| 1
| 4 LAN 1 WAN
| 5V 2A
| -
| v24 preSP2 svn 11546 micro
| initial flash: use Tftp flash
|
F5D7231-4P
| 1000
| K7SF5D7231P
| Broadcom BCM4712@200
| 16
| 4
| Broadcom
| b/g
| -
| -
| -
| 4 LAN 1 WAN
| 5V 2A
| USB port
| -
| initial flash: use Tftp flash
|
F5D7330
| v1xxx, v20xx
| K7SF5D7130A
| Broadcom BCM4710@125
| 8
| 2
| Broadcom mini PCI
| b/g
| 1
| -
| 1
| 1 LAN or WAN
| 5V 2A
| Wifi bridge/Game adapter
| must use VINT micro build
| initial flash: use Tftp flash
|
F5D8230-4
| 1001ea
| SA3- AGN 0901 AP0100
| Broadcom BCM4704@264
| 16
| 4
| Airgo (must replace mini-pci card with broadcom or other compatible card)
| b/g
| 1
| 1
| 1
| 4LAN 1 WAN
| 5- 12V 2A
| -
| v.24 rc7 - build 9360
| initial flash: use Tftp flash
|
F5D8232-4
| 1000 1021uk
| K7SF5D8232-4
| Atheros AR7141@300
| 16
| 8
| Atheros
| b/g/n
| -
| 1
| 1
| 4 Gb LAN 1 WAN
| 12v 1.4A
| 3" monochrome LCD screen on front.
| v.24 WIP
| development in progress
|
F5D8235-4
| v20xx
| K7SF5D8235-4B
| Ralink RT3052F@380
| 32
| 8
| SOC
| b/g/n
| -
| 1
| -
| 4 Gb LAN 1 WAN
| 12v 1.5A
| USB 2.0
|
| -
|
F5D8235-4
| v21xx
| K7SF5D8235-4B
| Ralink RT3052F@380
| 32
| 8
| SOC
| b/g/n
| -
| 1
| -
| 4 Gb LAN 1 WAN
| 12v 1.5A
| USB 2.0
| WIP
| -
|
F5D8235-4
| v3
| K7SF5D8235v3
| Broadcom BCM4718@480
| 32
| 8
| SOC
| b/g/n
| -
| 1
| 1
| 4 LAN 1 WAN
| 12v 1.4A
| USB 2.0, GBit WAN&LAN
| WIP
| -
|
F7D3301 & F7D7301
| v1 "Share Max"
| K7SF7D3301V1
| Broadcom BCM4718@480
| 64
| 8
| SOC
| b/g/n
| -
| 1
| 1
| 4 LAN 1 WAN
| 12v 1.5A
| 2x USB 2.0, GBit WAN&LAN
| v24 SP2 K2.6 15337
| -
|
F7D3302 & F7D7302
| v1 "Share"
| K7SF7D3302V1
| Broadcom BCM4718@480
| 64
| 8
| SOC
| b/g/n
| -
| 1
| 1
| 4 LAN 1 WAN
| 12v 1.5A
| 1x USB 2.0
| v24 SP2 K2.6 15337
| -
|
F7D4301 & F7D8301
| v1 "Play Max"
| K7SF7D4301V1
| Broadcom BCM4718@480
| 64
| 8
| BCM 43224
| a/b/g/n
| -
| 1
| 1
| 4 LAN 1 WAN
| 12v 1.5A
| 2x USB 2.0, GBit WAN&LAN
| v24 SP2 K2.6 15030
| use CFE mini Web Server for first flash.
|
F7D4302 & F7D8302
| v1 "Play"
| K7SF7D4302V1
| Broadcom BCM4718@480
| 64
| 8
| BCM 43224
| a/b/g/n
| -
| 1
| 1
| 4 LAN 1 WAN
| 12v 1.5A
| 1x USB 2.0
| v24 SP2 K2.6 15230
| use CFE mini Web Server for first flash.
|
Model
| H.W. rev
| FCC ID
| Platform & Frequency [MHz]
| RAM [MB]
| Flash [MB]
| Wireless NIC
| WLAN standard [802.11]
| mini PCI
| Serial port
| JTAG port
| Eth. port count
| PoE
| Volt. Input [V/A]
| Special Features Notes
| min required DD-WRT version
| Notes for Running DD-WRT
|
BWRG500
| -
| TDK-BWRG500
| Atheros AR2316A@180
| 16
| 4
| Atheros @ 26dBm
| b/g
| -
| 1
| yes
| 4 LAN 1 WAN
|
| 5V/4A
| =bwrg1000
| bwrg1000 build v.24 sp2 - build 11803
| needs activation
|
BWRG1000
| -
| TDK-BWR54G1
| Atheros AR2316A@180
| 16
| 4
| Atheros @ 29dBm
| b/g
| -
| 1
| yes
| 4 LAN 1 WAN
|
| 5V/4A
| -
| bwrg1000 build v.24 sp2 - build 11803
| needs activation
|
Model
| H.W. rev
| FCC ID
| Platform & Frequency [MHz]
| RAM [MB]
| Flash [MB]
| Wireless NIC
| WLAN standard [802.11]
| mini PCI
| Serial port
| JTAG port
| Eth. port count
| PoE
| Volt. Input [V/A]
| Special Features Notes
| min required DD-WRT version
| Notes for Running DD-WRT
|
BW1251
| -
| MXF-A950806AG
| Xscale IXP425@533
| 64
| 16
| 2
| Atheros AR5213A @ a/b/g
| 2
| 1
| 1
| 1 LAN WAN
| 802.af
| 12V 1A
| -
| ?
| board needed for port -> pm Sash
|
Model
| H.W. rev
| FCC ID
| Platform & Frequency [MHz]
| RAM [MB]
| Flash [MB]
| Wireless NIC
| WLAN standard [802.11]
| mini PCI
| Serial port
| JTAG port
| Eth. port count
| Volt. Input [V/A]
| Special Features Notes
| min required DD-WRT version
| Notes for Running DD-WRT
|
WAPM- HP- AM 54G54
| -
| ?
| Broadcom BCM4704@264
| 64
| 8
| Broadcom
| a/b/g/h
| -
| 1
| 1
| 4 PORT ADM 6996M
| ?
| ?
| v24 RC5
| ?
|
WBR-B11
| -
| ?
| Broadcom BCM4710@125
| 16
| 4
| Broadcom
| b/g
| 1
| 1
| 1
| 4 LAN 1 WAN
| 3,3V 2A
| -
| v23 SP2
| Use ddadder with "wbr-g54" as model name. WLAN does not work due to lack of driver.
|
WBR-G54
| -
| ?
| Broadcom BCM4710@125
| 16
| 4
| Broadcom
| b/g
| 1
| 1
| 1
| 4 LAN 1 WAN
| 3,3V 2A
| -
| v23 SP2, only VINT for >=v.24
| initial flash: use ddadder or Tftp_flash
|
WBR2-G54
| -
| FDI-04600142-0
| Broadcom BCM4712@200
| 16
| 4
| Broadcom
| b/g
| -
| -
| ?
| 4 LAN 1 WAN
| 3,3V 2A
| -
| v23 SP2
| initial flash: use ddadder or Tftp_flash
|
WBR2-G54S
| -
| FDI-04600142-0
| Broadcom BCM4712@200
| 16
| 4
| Broadcom
| b/g
| -
| -
| ?
| 4 LAN 1 WAN
| 3,3V 2A
| -
| v23 SP2
| initial flash: use ddadder or Tftp_flash
|
WHR-G54S
| -
| FDI-04600264-0
| Broadcom BCM5352@200
| 16
| 4
| Broadcom
| b/g
| -
| 1
| 1
| 4 LAN 1 WAN
| 3.3V 2A
| -
| v23 SP2
| initial flash: use Tftp_flash
|
WHR-G125
| -
| FDI-09101584-0
| Broadcom BCM5354@240
| 16
| 4
| Broadcom
| b/g
| -
| 1
| 1
| 4 LAN 1 WAN
| 3.3V 2A
| -
| v24 - build 2007 - 0516
| initial flash: use Tftp_flash
|
WHR-G300N
| v1
| FDI-09101538-0
| Ralink RT3052F@384
| 32
| 4
| Ralink
| b/g/n
| -
| 1
| ?
| 4 LAN 1 WAN
| 12V 2A
| -
| v24 SP2
| WHR-G300N
|
WHR-G300N
| v2
| FDI-09101561-0
| Atheros AR7240@400
| 32
| 4
| Atheros AR9283
| b/g/n
| -
| 1
| ?
| 4 LAN 1 WAN
| 12V 1A
| -
| v24 SP2 - build 13744 - 20100126
| WHR-G300N_V2
|
WHR-HP-AG108
| ?
| FDI-09101540-0
| Atheros AR5312@220
| 32
| 4
| Atheros
| a/b/g/h
| -
| 1
| ?
| 4 LAN 1 WAN
| 5V 2A
| -
| v23 SP2
| only flashable with serial or a telnet backdoor
|
WHR-HP-G300N
| ?
| FDI-09101621-0
| Atheros AR7240@400
| 32
| 4
| Atheros
| b/g/n?
| -
| 1
| ?
| 4 LAN 1 WAN
| 5V 2.3A
| -
| v24 SP2 - build 13406 - 20091207
| Offical DD-WRT build on buffalo support website
|
WHR-AMG54
| ?
| ?
| Broadcom BCM5352@200?
| 16?
| 4
| Broadcom
| a/b/g
| ?
| ?
| ?
| 4 LAN 1 WAN
| ?
| -
| v24 sp2
| use firmware for WHR-HP-G54
|
WHR-HP-G54
| -
| FDI-09101577-0
| Broadcom BCM5352@200
| 16
| 4
| Broadcom
| b/g
| -
| 1
| 1
| 4 LAN 1 WAN
| 5V 2.6A
| -
| v24 std (05/24/08) - build 9526
| initial flash: use Tftp_flash
|
WHR-HP-G54-DD
| -
| FDI-09101577-0
| Broadcom BCM5352@200
| 16
| 4
| Broadcom
| b/g
| -
| 1
| 1
| 4 LAN 1 WAN
| 5V 2.6A
| -
| v23 SP2
| ships with pre-installed DD-WRT
|
WHR-HP-GN
| ?
| FDI-09101567-0
| Atheros AR7240@400
| 32
| 4
| Atheros
| b/g/n
| -
| 1
| ?
| 4 LAN 1 WAN
| 5V 2.3A
| -
| v24 SP2 - build 13406 - 20091207
|
|
WHR2-A54G54
| -
| ?
| Broadcom ? @ ?
| 16?
| 4?
| Broadcom
| b/g?
| -
| ?
| ?
| 4 LAN 1 WAN?
| 5V 0.9A?
| -
| v23?
| ?
|
WHR3-AG54
| -
| ?
| Broadcom BCM4704@264
| 64
| 4
| Broadcom
| a/b/g
| 1
| 1
| 1
| 4 LAN 1 WAN
| 3.3V 2A
| AOSS, External Antenna Connector
| v24 SP2 VINT Eko 15230 (15508M VINT Eko is work good too)
| Use tftp for all updates
|
WLA-G54
| -
| ?
| Broadcom BCM4702@125
| 16
| 4
| Broadcom
| b/g
| 1
| -
| ?
| 4 LAN
| 3,3V ?A
| -
| v23 SP2
| initial flash: use ddadder or Tftp_flash
|
WLA-G54C
| -
| ?
| Broadcom BCM4702@125
| 16
| 4
| Broadcom
| b/g
| 1?
| ?
| ?
| 1 LAN
| 3,3V ?A?
| -
| v24 preSP2 13064
| initial flash: use ddadder or Tftp_flash
|
WLA2-G54C
| -
| FDI-09101669-0
| Broadcom BCM4712@200
| 16
| 4
| Broadcom
| b/g
| -
| 1
| 1
| 1 LAN
| 3,3V 2A
| -
| v23 SP3
| initial flash: use ddadder or Tftp_flash
|
WLA2-G54L
| -
| ?
| Broadcom BCM4702@125
| 16
| 4
| Broadcom
| b/g
| -
| 1
| 1
| 1 LAN?
| 3,3V? A?
| -
| v23 ?
| initial flash: use ddadder or Tftp_flash
|
WLAH-G54
| -
| ?
| Broadcom BCM4702@125
| 16
| 4
| Broadcom
| b/g?
| -
| 1
| 1
| 1 LAN?
| 3,3V ?A?
| -
| v23 ?
| initial flash: use ddadder or Tftp_flash
|
WLI-CB-AG300N
| -
| ?
| Ralink RT2880F@266
| 32
| 4
| Ralink
| 1x a/b/g/n 1x b/g
| -
| 0
| 0
| 4 LAN /1 WAN (Gb)
| 12V 2A
| =WZR-AG300NH
| board donation needed for port
| -
|
WLI-TX1-G54
| -
| ?
| Broadcom BCM5352@200
| 16
| 4
| Broadcom
| b/g?
| -
| ?
| ?
| 4 LAN?
| 5V ?A?
| -
| v24 ?
| initial flash: use ddadder or Tftp_flash
|
WLI-TX4-G54HP
| -
| ?
| Broadcom BCM5352@200
| 16
| 4
| Broadcom
| b/g
| -
| ?
| ?
| 4 LAN
| 5V 2,6A
| -
| v24 - 5814
| initial flash: use ddadder or Tftp_flash
|
WLI2-TX1-G54
| -
| ?
| Broadcom BCM5352@200
| 16
| 4
| Broadcom
| b/g
| -
| ?
| ?
| 1
| 5V ?A?
| -
| v24 ?
| initial flash: Tftp_flash
|
WLI3-TX1-G54
| -
| ?
| Broadcom BCM4712@200?
| 16
| 4
| Broadcom
| b/g
| -
| 1
| 1
| 1 LAN
| 3.3V 2A
| Hardware identical to WLA2-G54C (Board ID WAPB-124G V01)
| v24 ?
| initial flash: use ddadder or Tftp_flash
|
WVR-G54-NF
| -
| ?
| Broadcom ? @ ?
| 16?
| 4?
| Broadcom
| b/g
| -
| ?
| ?
| ?
| ?V ?A
| -
| ?
| initial flash: use ddadder or Tftp_flash
|
WZR-AGL300N
| -
| ?
| Ralink RT2880F@266
| 32
| 4
| Ralink
| 1x a/b/g/n 1x b/g
| -
| 0
| 0
| 4 LAN /1 WAN (Gb)
| 12V 2A
| -
| board donation needed for port
| -
|
WZR-G144NH
|
| - (Jpn model)
| Broadcom BCM4785@300
| 32
| 4
| Broadcom
| b/g/n
| -
| -
| ?
| 4 LAN 1 WAN
| ?
| Gbit switch
| v24 RC6.2
| initial flash: use ddadder or Tftp_flash
|
WZR-G54
| -
| - (Jpn model)
| Broadcom BCM4704@264
| 16
| 4
| Broadcom BCM4306
| b/g
| 1
| ?
| ?
| 4LAN 1 WAN
| 5V 1.5A
| -
| v24?
| initial flash: use ddadder or Tftp_flash
|
WZR-G300N
| -
| FDI-09101466-0
| Broadcom BCM4704@264
| 16/32
| 4
| Broadcom
| b/g/n
| 1
| 1
| 1
| 4 LAN 1 WAN
| 12V 1.25A
| -
| v24
| -
|
WZR-HP-AG300H
| v1
| FDI-09101592
| Atheros AR7161@680
| 128
| 32
| Atheros AR9220 + AR9223
| a/b/g/n
| -
| 1
| 1
| 4 LAN 1 WAN (Gb)
| 12V 2A
| 1 USB 2.0, 1000 BaseT (Gb) switch
| v24sp2 - build ?
|
|
WZR-HP-G54
| -
| FDI-09101457-0
| Broadcom BCM4704@264
| 16
| 4
| Broadcom BCM4306
| b/g
| 1
| 1
| ?
| 4 LAN 1 WAN
| 5V 1.5A
| -
| v24?
| initial flash: use ddadder or Tftp_flash
|
WZR-HP-G300NH
| v1
| FDI-09101560-0
| Atheros AR9132@400
| 64
| 32
| Atheros AR9103
| b/g/n
| -
| 1
| 1
| 4 LAN 1 WAN (Gb)
| 12V 1.5-2A
| 1 USB 2.0, 1000 BaseT (Gb) switch
| v24sp2 v13525 20091228
| WZR-HP-G300NH
|
WZR-RS-G54
| ?
| ?
| Broadcom BCM4704@264
| 64
| 8
| Brodcom BCM4306
| b/g
| 1
| 1
| ?
| 4 LAN 1 WAN
| 3.3V 1.5A
| -
| ?
| initial flash: use ddadder or Tftp_flash
|
Model
| H.W. rev
| FCC ID
| Platform & Frequency [MHz]
| RAM [MB]
| Flash [MB]
| Ant. Conn. Type
| WLAN NIC
| WLAN standard [802.11]
| mini PCI
| Serial port
| JTAG port
| Eth. port count
| Volt. Input [V/A]
| Special Features Notes
| min required DD-WRT version
| Notes for Running DD-WRT
|
NSLU2
| -
| ?
| Xscale IXP420@133-266
| 32
| 8
| -
| -
| -
| -
| 2 USB, Mod to add RS- 232
| Mod to add
| 1
| 5V 2A
| device needed for port -> pm Brain Slayer
| v24 RC5 - kernel support
| Install Inst.
|
RVS4000
| 1.0
| ?
| Star Semiconductor STR9202
| 64
| 8
| -
| -
| -
| -
| -
| 1
| 4 LAN 1 WAN
| 12V 1A
| -
| wip
| Install Inst.
|
RV042
| 1.0
| ?
| Xscale IXP425@266
| 32
| 8
| -
| -
| -
| -
| 1
| 1
| 4 LAN 2 WAN
| 12V 1A
| -
| wip
| Install Inst.
|
RV082
| 1.0
| ?
| Xscale IXP425@533
| 32
| 16
| -
| -
| -
| -
| 1
| 1
| 8 LAN 2 WAN
| 12V 1A
| -
| wip
| Install Inst.
|
Model
| H.W. rev
| FCC ID
| Platform & Frequency [MHz]
| RAM [MB]
| Flash [MB]
| Ant. Conn. Type
| WLAN NIC
| WLAN standard [802.11]
| mini PCI
| Serial port
| JTAG port
| Eth. port count
| Volt. Input [V/A]
| Special Features Notes
| min required DD-WRT version
| Notes for Running DD-WRT
|
WAP54G
| 1.0
| PKW-WAP54G
| Broadcom BCM4702@125
| 8 or 16
| 2 or 4
| RP- TNC
| Broadcom BCM4306
| b/g
| 1
| No
| Yes
| 1 LAN
| 5V 2.5A
|
| Micro VINT only
| Install Inst.
|
WAP54G
| 1.1
| PKW-WAP54G
| Broadcom BCM4702@125
| 8 or 16
| 2 or 4
| RP- TNC
| Broadcom BCM4306
| b/g
| 1
| No
| Yes
| 1 LAN
| 5V 2.5A
|
| Micro VINT only
| Install Inst.
|
WAP54G
| 2.0
| Q87-WAP54GV2
| Broadcom BCM4712@200
| 8
| 2
| RP- TNC
| Broadcom SoC
| b/g
| No
| Yes
| Yes
| 1 LAN
| 12V 0.5A
|
| Micro only
| Install Inst.
|
WAP54G
| 3.0
| Q87-WAP54GV3
| Broadcom BCM5352@200
| 8
| 2
| RP- TNC
| Broadcom SoC
| b/g
| No
| Yes
| Yes
| 1 LAN
| 12V 0.5A
|
| Micro only
| Install Inst.
|
WAP54G
| 3.1
| Q87-WAP54GV31
| Broadcom BCM5352@200
| 8
| 2
| RP- TNC
| Broadcom SoC
| b/g
| No
| Yes
| Yes
| 1 LAN
| 12V 0.5A
|
| Micro only
| Install Inst.
|
WRE54G
| v1
| Q87-WRE54G
| Broadcom BCM4712@200
| 8
| 2
| RP- TNC
| Broadcom SoC
| b/g
| -
| 1
| -
| -
| 3.3V 1A
|
| v24 sp2 build 12624
| Install Inst.
|
WRH54G
| ?
| Q87-WRH54G
| Broadcom BCM5354@240
| 8
| 2
| RP- TNC
| Broadcom SoC
| b/g
| -
| Yes
| Yes
| 4 LAN 1 WAN
| 12V 0.5A
|
| v24 micro rc7 - 9063
| Install Inst.
|
WRT51AB
| 1.0
| PKW-WRT51AB
| Broadcom BCM4702@125
| 32
| 4
| Fixed
| Broadcom BCM4301+ Atheros AR5000
| a/b
| 2
| ?
| Yes
| 4 LAN 1 WAN
| 5V 2.5A
| 24- Leds
| WIP Will Require Jtag for first flash!
| Install Inst.
|
WRT54G
| 1.0
| PKW-WM54G
| Broadcom BCM4710@125
| 16
| 4
| RP- TNC
| Broadcom BCM4306
| b/g
| 1
| Yes
| Yes
| 4 LAN 1 WAN
| 5V 2A
|
|
| Install Inst.
|
WRT54G
| 1.1
| Q87-WRT54G11
| Broadcom BCM4710@125
| 16
| 4
| RP- TNC
| Broadcom BCM4306
| b/g
| No
| Yes
| Yes
| 4 LAN 1 WAN
| 12V 1A
|
|
| Install Inst.
|
WRT54G
| 2.0
| Q87-WRT54GV2
| Broadcom BCM4712@200
| 16
| 4
| RP- TNC
| Broadcom BCM2050KML
| b/g
| No
| Yes
| Yes
| 4 LAN 1 WAN
| 12V 1A
|
|
| Install Inst.
|
WRT54G
| 2.2
| Q87-WT54GV22
| Broadcom BCM4712@216
| 16
| 4
| RP- TNC
| Broadcom BCM2050KML
| b/g
| No
| Yes
| Yes
| 4 LAN 1 WAN
| 12V 1A
|
|
| Install Inst.
|
WRT54G
| 3.0
| Q87-WT54GV22
| Broadcom BCM4712@216
| 16
| 4
| RP- TNC
| Broadcom BCM2050KML
| b/g
| No
| Yes
| Yes
| 4 LAN 1 WAN
| 12V 1A
|
|
| Install Inst.
|
WRT54G
| 3.1
| ?
| Broadcom BCM4712@216
| 16
| 4
| RP- TNC
| Broadcom BCM2050KML
| b/g
| No
| Yes
| Yes
| 4 LAN 1 WAN
| 12V 0.5A
|
|
| Install Inst.
|
WRT54G
| 4.0
| Q87-WT54GV40
| Broadcom BCM5352@200
| 16
| 4
| RP- TNC
| Broadcom SoC
| b/g
| No
| Yes
| Yes
| 4 LAN 1 WAN
| 12V 1A
|
|
| Install Inst.
|
WRT54G
| 5.0
| Q87-WRT54GV5
| Broadcom BCM5352@200
| 8
| 2
| RP- TNC
| Broadcom SoC
| b/g
| No
| Yes
| Yes
| 4 LAN 1 WAN
| 12V 0.5A
|
| Micro Only
| Install Inst.
|
WRT54G
| 5.1
| ?
| Broadcom BCM5352@200
| 8
| 2
| RP- TNC
| Broadcom SoC
| b/g
| No
| Yes
| Yes
| 4 LAN 1 WAN
| 12V 0.5A
|
| Micro Only
| Install Inst.
|
WRT54G
| 6.0
| Q87-WT54GV60
| Broadcom BCM5352@200
| 8
| 2
| RP- TNC
| Broadcom SoC
| b/g
| No
| Yes
| Yes
| 4 LAN 1 WAN
| 12V 0.5A
|
| Micro Only
| Install Inst.
|
WRT54G
| 7.2
| ?
| Broadcom BCM5354@240
| 8
| 2
| RP- TNC
| Broadcom SoC
| b/g
| No
| Yes
| Yes
| 4 LAN 1 WAN
| 12V 0.5A
|
| Micro Only
| Install Inst.
|
WRT54G
| 8.0
| Q87-WRT54GV8
| Broadcom BCM5354@240
| 8
| 2
| Fixed
| Broadcom SoC
| b/g
| No
| Yes
| Yes
| 4 LAN 1 WAN
| 12V 0.5A
|
| Micro Only
| Install Inst.
|
WRT54G
| 8.1
| Q87-WRT54GV81
| Broadcom BCM5354@240
| 8
| 2
| Fixed
| Broadcom BCM5354 SoC
| b/g
| No
| Yes
| Yes
| 4 LAN 1 WAN
| 12V 0.5A
|
| Micro Only
| Install Inst.
|
WRT54G
| 8.2
| Q87-WRT54GV82
| Broadcom BCM5354@240
| 8
| 2
| Fixed
| Broadcom SoC
| b/g
| No
| Yes
| Yes
| 4 LAN 1 WAN
| 12V 0.5A
|
| Micro Only
| Install Inst.
|
WRT54G2
| 1.0
| Q87-WRT54G2V1
| Broadcom BCM5354@240
| 16
| 2
| Internal
| Broadcom SoC
| b/g
| No
| Yes
| Yes
| 4 LAN 1 WAN
| 12V 0.5A
|
| Micro only
| Install Inst.
|
WRT54G2
| 1.1
| ?
| Atheros AR2317@180
| 16
| 4
| Internal
| Atheros
| b/g
| No
| ?
| ?
| 4 LAN 1 WAN
| 12V 0.5A
|
| v.24 SP2 - Build 12427
| Install Inst.
|
WRT54G2
| 1.3
| Q87-WRT54G2V13
| Broadcom BCM5354@240
| 8
| 2
| Internal
| Broadcom SoC
| b/g
| No
| 1
| Yes
| 4 LAN 1 WAN
| 12V 0.5A
|
| Micro only
| Install Inst.
|
WRT54GL
| 1.0 1.1
| Q87-WT54GV40
| Broadcom BCM5352@200
| 16
| 4
| RP- TNC
| Broadcom SoC
| b/g
| No
| Yes
| Yes
| 4 LAN 1 WAN
| 12V 1A
|
|
| Install Inst.
|
WRT54G-LA
| 8.0
| Q87-WRT54GV8
| Broadcom BCM5354@240
| 8
| 2
| Fixed
| Broadcom SoC
| b/g
| No
| Yes
| Yes
| 4 LAN 1 WAN?
| 12V 0.5A
| WRT54G v8.0 clone
| v24 micro rc7 - build ?
| Install Inst.
|
WRT54G-RG
| ?
| Q87-WT54GV40
| Broadcom BCM5352@200
| 32
| 8
| RP- TNC
| Broadcom SoC
| b/g
| No
| 2
| Yes
| 4 LAN 1 WAN
| 12V 1A
|
| v24-SP2 build 12548
| Install Inst.
|
WRT54G-TM
|
| Q87-WT54GV40
| Broadcom BCM5352@200
| 32
| 8
| RP- TNC
| Broadcom SoC
| b/g
| No
| 2
| Yes
| 4 LAN 1 WAN
| 12V 1A
|
| v24-SP2 build 12548
| Install Inst.
|
WRT54GS
| 1.0
| Q87-WRT54GV2
| Broadcom BCM4712@200
| 32
| 8
| RP- TNC
| Broadcom BCM2050KML
| b/g
| No
| No
|
| 4 LAN 1 WAN
| 12V 1A
|
|
| Install Inst.
|
WRT54GS
| 1.1
| Q87-WT54GV22
| Broadcom BCM4712@200
| 32
| 8
| RP- TNC
| Broadcom BCM2050KML
| b/g
| No
| 2
| Yes
| 4 LAN 1 WAN
| 12V 1A
| ?
| ?
| Install Inst.
|
WRT54GS
| 2.0
| Q87-WT54GV22
| Broadcom BCM4712@200
| 32
| 8
| RP- TNC
| Broadcom BCM2050KML
| b/g
| No
| 2
| Yes
| 4 LAN 1 WAN
| 12V 1A
|
|
| Install Inst.
|
WRT54GS
| 2.1
| ?
| Broadcom BCM4712@216
| 32
| 8
| RP- TNC
| Broadcom BCM2050KML
| b/g
| No
| 2
| Yes
| 4 LAN 1 WAN
| 12V 1A
|
|
| Install Inst.
|
WRT54GS
| 3.0
| Q87-WT54GV40
| Broadcom BCM5352@200
| 32
| 8
| RP- TNC
| Broadcom SoC
| b/g
| No
| 2
| Yes
| 4 LAN 1 WAN
| 12V 1A
|
|
| Install Inst.
|
WRT54GS
| 4.0
| Q87-WT54GV40
| Broadcom BCM5352@200
| 16
| 4
| RP- TNC
| Broadcom SoC
| b/g
| No
| 2
| Yes
| 4 LAN 1 WAN
| 12V 1A
|
|
| Install Inst.
|
WRT54GS
| 5.0
| ?
| Broadcom BCM5352@200
| 16
| 2
| RP- TNC
| Broadcom SoC
| b/g
| No
| 2
| Yes
| 4 LAN 1 WAN
| 12V 0.5A
|
| Micro only
| Install Inst.
|
WRT54GS
| 5.1
| ?
| Broadcom BCM5352@200
| 16
| 2
| RP- TNC
| Broadcom SoC
| b/g
| No
| 2
| Yes
| 4 LAN 1 WAN
| 12V 0.5A
|
| Micro only
| Install Inst.
|
WRT54GS
| 6.0
| Q87-WT54GV60
| Broadcom BCM5352@200
| 16
| 2
| RP- TNC
| Broadcom SoC
| b/g
| No
| 2
| Yes
| 4 LAN 1 WAN
| 12V 0.5A
|
| Micro only
| Install Inst.
|
WRT54GS
| 7.0
| Q87-WRT54GSV7
| Broadcom BCM5354@240
| 16
| 2
| RP- TNC
| Broadcom SoC
| b/g
| No
| 2
| Yes
| 4 LAN 1 WAN
| 12V 0.5A
|
| Micro only
| Install Inst.
|
WRT54GS
| 7.2
| Q87-WRT54GSV72
| Broadcom BCM5354@240
| 16
| 2
| RP-TNC/Fixed
| Broadcom SoC
| b/g
| No
| 2
| Yes
| 4 LAN 1 WAN
| 12V 0.5A
|
| Micro only
| Install Inst.
|
WRT54GS2
| 1.0
| Q87-WRT54G2V1
| Broadcom BCM5354@240
| 8
| 2
| Internal
| Broadcom SoC
| b/g
| No
| Yes
| Yes
| 4 LAN 1 WAN?
| 12V 0.5A
|
| v24 sp2 ?
| Install Inst.
|
WRT54GX
| 1.0
| Q87-WRT54GX
| Broadcom BCM4707@266
| 16
| 4
| RP- TNC
| ?
| b/g
| Yes
| No
|
| 4 LAN 1 WAN
| 12V
| MIMO
| No official support (Airgo)
| |