Windows Memory handling tips
If you run the Windows application, a ” memory ” of the failure, according to the following methods of examination and treatment:
1 , should first check the use of dell vostro 1200 Windows resources , if resources are occupied by more , fewer available resources , open a new file will appear ” out of memory “issue. Then we can clear the screen , reducing the number of windows , close unused applications , including memory-resident TSR program , will minimize the Windows application icon , if the problem is in the running for a specific application procedures appear, and application software Contact the supplier , may be caused by poor management of data objects ;
2 , if the problem is not resolved, remove or save the Clipboard ( clipboard ) content , using the ControlPanel Desktop option to wallpaper (Wallpaper) is set to None;
3 , If the problem still exists, can edit the dell vostro 1200 battery PIF file PIF Editor , increase the PIF file defined MemoryRequirements: KB Required value ; in standard mode, select the Prevent ProgramSwitch, the switches opens, exit the application back to Windows ; if 386 enhanced mode , the Display Usage will have to set the FullScreen ( full screen mode ), the Execution is set to Exclusive, the Video memory is set to as low as possible means ;
4 , If the problem persists, then reboot into dell studio 1735 battery Windows, and to ensure that the ” start ” icon in the application of no other independent software up and running at the same time , in the WIN.INI file does not Run or Load command to load any independent Application. Normally, a ” memory “problems can generally be in accordance with the following approach . First of all, out of those who do not need to run applications, then , re- check the system ’s available resources they have. If more than 30% of available resources , generally run new procedures. When there are multiple applications running in the system , you can exit one, check for available resources , if an application before and after the withdrawal , no change in the percentage of available resources . illustrate the application does not release the resources it occupied . If you want to recover these resources do not release the only exit Windows , then re-enter Windows. In order to ensure that the system boot into Windows when sufficient resources available in the ” start ” icon in the application should be no independent start running at the same time , in the WIN.INI file, dell studio 1737 battery not from the Run or Load command to load any applications not related to Because they also start the application may have been unrelated to occupy a lot of resources, making the application can not be used to run . Generally speaking, after this deal , not a ” memory ” of the problem
Related posts:
- How to expand the memory of notebook
- Windows 8 has anti-hacking features
- Tips for saving laptop battery
- Five Tips For Buying The Right Laptop Computer
If you enjoyed this post, please consider to leave a comment or subscribe to the feed and get future articles delivered to your feed reader.
