Mercury-in-glass thermometer

From Wikipedia, the free encyclopedia
Jump to: navigation, search
Closeup of a maximum thermometer. The break in the column of mercury is visible.

A mercury-in-glass thermometer, also known as a mercury thermometer, was invented by German physicist Daniel Gabriel Fahrenheit and is a thermometer consisting of mercury in a glass tube. Calibrated marks on the tube allow the temperature to be read by the length of the mercury within the tube, which varies according to the heat given to it. To increase the sensitivity, there is usually a bulb of mercury at the end of the thermometer which contains most of the mercury; expansion and contraction of this volume of mercury is then amplified in the much narrower bore of the tube. The space above the mercury may be filled with nitrogen or it may be less than atmospheric pressure, which is normally known as a vacuum.

Contents

[hide]

[edit] History

An exterior thermometer.

The thermometer was used by the originators of the Fahrenheit and Celsius temperature scales.

Anders Celsius devised the Celsius scale, which was described in his publication the origin of the Celsius temperature scale in 1742.

Celsius used two fixed points in his scale: the temperature of melting ice and the temperature of boiling water. This wasn't a new idea, since Isaac Newton was already working on something similar. The distinction of Celsius was to use the melting temperature and not the freezing temperature. The experiments for reaching a good calibration of his thermometer lasted for 2 winters. By performing the same experiment over and over again, he discovered that ice always melted at the same calibration mark on the thermometer. He found a similar fixed point in the calibration of boiling water vapour (when this is done to high precision, a variation will be seen with atmospheric pressure). At the moment that he removed the thermometer from the vapour, the mercury (an earth material) level climbed slightly. This was related to the rapid cooling (and contraction) of the glass.

The air pressure influences the boiling point of water. Celsius claimed that the level of the mercury in boiling water is proportional to the height of the barometer.

When Celsius decided to use his own temperature scale, he originally defined his scale "upside-down", i.e. he chose to set the boiling point of pure water at 0 °C (212 °F) and the freezing point at 100 °C (32 °F).[1] One year later Frenchman Jean Pierre Cristin proposed to invert the scale with the freezing point at 0 °C (32 °F) and the boiling point at 100 °C (212 °F). He named it Centigrade.[2]

Finally, Celsius proposed a method of calibrating a thermometer:

  1. Place the cylinder of the thermometer in melting pure water and mark the point where the fluid in the thermometer stabilises. This point is the freeze/thaw point of water.
  2. In the same manner mark the point where the fluid stabilises when the thermometer is placed in boiling water vapour.
  3. Divide the length between the two marks into 100 equal pieces.

These points are adequate for approximate calibration but both vary with atmospheric pressure. Nowadays, the triple point of water is used instead (the triple point occurs at 273.16 kelvins (K), 0.01 °C).

[edit] Maximum thermometer

A special kind of mercury-in-glass thermometer, called a maximum thermometer, works by having a constriction in the neck close to the bulb. As the temperature rises the mercury is pushed up through the constriction by the force of expansion. When the temperature falls the column of mercury breaks at the constriction and cannot return to the bulb thus remaining stationary in the tube. The observer can then read the maximum temperature over the set period of time. To reset the thermometer it must be swung sharply. This is similar to the design of a medical thermometer.

[edit] Physical properties

Mercury will solidify (freeze) at -38.83 °C (-37.89 °F) and so may only be used at higher temperatures. Mercury, unlike water, does not expand upon solidification and will not break the glass tube unlike water when it is frozen then quickly heated will break, making it difficult to notice when frozen. If the thermometer contains nitrogen the gas may flow down into the column and be trapped there when the temperature rises. If this happens the thermometer will be unusable until returned to the factory for reconditioning. To avoid this some weather services require that all mercury-in-glass thermometers to be brought indoors when the temperature falls to -37 °C (-34.6 °F). In areas where the maximum temperature is not expected to rise above -38.83 °C (-37.89 °F) a thermometer containing a mercury-thallium alloy may be used. This has a solidification (freezing) point of -61.1 °C (-78 °F).

[edit] Phase out

Today, many mercury-in-glass thermometers are still widely used in meteorology; however, they are becoming increasingly rare for other uses, as many countries have banned them outright from medical use. Some manufacturers use galinstan, a liquid alloy of gallium, indium, and tin, as a replacement for mercury.

Map of the countries of the European Union that banned mercury-in-glass thermometers according to Directive 2007/51/EC as of 28 April 2008. Countries in blue have made legal bans on the issue, countries in gray are of unknown status at the present, and countries in red declared that said "Member State does not consider national execution measures necessary."[3]

The typical "fever thermometer" contains between 0.5 to 3 g (.3 to 1.7 dr) of elemental mercury.[4] Swallowing this amount of mercury would, it is said, pose little danger but the inhaling of the vapour could lead to health problems.[5]

In the United States both the American Academy of Pediatrics[6] and the United States Environmental Protection Agency[7] recommend that alternative thermometers be used in the home.[8]

By the Philippines Department of Health’s Administrative Order 2008-0221, all mercury equipment from hospitals, including mercury-in-glass thermometers, will be phased out in the Philippines by September 28, 2010. Even before the order was released, 50 hospitals have already banned mercury from their establishments. Among these fifty hospitals, the Philippine Heart Center was the first one to do so. San Juan de Dios Hospital, Philippine Children’s Medical Center, San Lazaro Hospital, Ospital ng Muntinlupa, Lung Center of the Philippines, the National Kidney and Transplant Institute, Manila Adventist Medical Center and Las Piñas Hospital also made steps to ban the toxic chemical. The country was the first one to make a step to ban mercury from its health care system in Southeast Asia.[9][10]

Taiwan wants to ban mercury-in-glass thermometers by 2011.[11]

[edit] See also

[edit] References

[edit] External links

Personal tools
Namespaces
Variants
Actions
Navigation
Interaction
Languages