From DD-WRT Wiki
[edit] Read Me First!
[edit] About this list
This page lists and compares all devices that are known to work with DD-WRT.
If you don't find your hardware below, it probably isn't supported yet and you risk breaking it. See Known incompatible devices for the black list, or refer to Router detection to determine whether or not support can be added in the future.
[edit] Which version may I flash?
See Which v24 build do I flash onto my Broadcom router?.
[edit] Flash amount
[edit] Broadcom
[edit] Note on devices with 2MB flash
On devices with only 2MB flash memory, only the micro version of DD-WRT is supported. This is a stripped-down firmware with only the basic features to fit in the limited space. Users should not expect to be able to install additional software packages on such devices. Because of the limited features of the micro version, users are strongly recommended to avoid buying devices with only 2 MB of flash memory.
The 2MB flash support is for Broadcom based routers only, all other platforms requires at least 4MB flash!
Despite the limitations of micro version compared to the full version, if you already own a device with 2 MB of flash memory, installing the micro DD-WRT version is likely to add additional functionality that your device's original firmware did not support.
[edit] Note on devices with 4MB flash
With 4MB of flash you can run the standard build (Linux kernel 2.4) or the small build (Linux kernel 2.6). These builds are usually enough for the majority of users but anyone who intend to load additional software packages on their router should get a router with 8MB or more of flash memory.
Do not flash the Mega build on devices with 4MB flash memory. Mega requires 8 or more MB flash.
[edit] Note on devices with 8 or more MB flash
You can flash the Mega, Big, or standard++ builds that are bigger than 4MB. Check the tables below for support.
[edit] Atheros and Ralink
[edit] Note on devices with 2MB flash
Not supported by dd-wrt, Atheros and Ralink builds needs at least 4MB of flash.
[edit] Note on devices with 4MB flash
Atheros and Ralink builds are not prefixed with mini, small, std, or mega. 4MB is usually enough for basic dd-wrt functions but there are a few routers where certain functions had to be removed due to space limitations.
[edit] Note on devices with 8 or more MB flash
This is the flash size needed for those users who intend to load additional software packages on their router or want to run a build compiled with additional functionality.
[edit] HOWTO/FAQ to the Comparison Table
- Please keep it simple to administer for all users! One line, one device! NO rowspanning stuff!
- WIP = Work In Progress (Located under version). Sometimes we need the hardware to do the port. So feel free to contact Sash via e-mail and provide us with the hardware so we can get this started!
- NO static linking to DD-WRT firmware releases, they get old very fast!
- This table is a work-in-progress and likely contains errors and omissions, please update it as needed and fill in the blanks if you can.
[edit] Supported Devices
[edit] Abocom
Model |
H.W. rev |
FCC ID |
Platform & Frequency [MHz] |
RAM [MB] |
Flash [MB] |
Wireless NIC |
WLAN standard [802.11] |
mini PCI |
Serial port |
JTAG port |
Eth. port count |
PoE |
Volt. Input [V/A] |
Special Features Notes |
min required DD-WRT version |
Notes for Running DD-WRT |
WAP2102 |
? |
MQ4WAP2102 |
Atheros AR2317@180 |
16 |
4 |
Atheros |
B/G |
? |
? |
? |
4 LAN 1 WAN |
? |
3,3V / 1,5A |
= Planex GW-MF54G2 |
MF54G2 v.24 pre sp2 - build 12110 |
? |
[edit] Accton
Model |
H.W. rev |
FCC ID |
Platform & Frequency [MHz] |
RAM [MB] |
Flash [MB] |
Wireless NIC |
WLAN standard [802.11] |
mini PCI |
Serial port |
JTAG port |
Eth. port count |
PoE |
Volt. Input [V/A] |
Special Features Notes |
min required DD-WRT version |
Notes for Running DD-WRT |
MR3201A |
? |
HED-MR3201A |
Atheros AR2315@180 |
16 |
8 |
Atheros |
b/g |
- |
1 |
Y |
1 WAN |
- |
5V 2A |
=Fon 2100 |
FON version |
Flashing procedure |
MR3202a |
- |
HEDMR3202A |
Atheros AR2317@180 |
16 |
8 |
Atheros |
b/g |
- |
? |
? |
? |
- |
? |
? |
v24 rc2 |
? |
Model |
H.W. rev |
FCC ID |
Platform & Frequency [MHz] |
RAM [MB] |
Flash [MB] |
Wireless NIC |
WLAN standard [802.11] |
mini PCI |
Serial port |
JTAG port |
Eth. port count |
PoE |
Volt. Input [V/A] |
Special Features Notes |
min required DD-WRT version |
Notes for Running DD-WRT |
NR22/Y |
- |
IFA-NRXX |
Ralink RT3052F@380 |
32 |
4 |
Ralink |
b/g/n |
- |
|
|
4 LAN 1 wAN |
- |
5V/2A? |
|
NR22 v.24SP2 - build 12826 - 20090904 |
|
Model |
H.W. rev |
FCC ID |
Platform & Frequency [MHz] |
RAM [MB] |
Flash [MB] |
Wireless NIC |
WLAN standard [802.11] |
mini PCI |
Serial port |
JTAG port |
Eth. port count |
PoE |
Volt. Input [V/A] |
Special Features Notes |
min required DD-WRT version |
Notes for Running DD-WRT |
MI424WR |
A |
LNQ802MRG |
Xscale IXP425@533 |
32 |
8 |
dependy on card |
ralink b/g (must be replaced) |
1 |
1 |
1 |
4 LAN 1 WAN |
- |
5V (max 9v) / 3A |
OEM'd to Verizon, FIOS port will not work |
v.24 sp2 - build 12646 - 13/08/09 |
MI424WR |
MI424WR |
C |
LNQ802MAG |
Xscale IXP425@533 |
32 |
8 |
dependy on card |
Atheros b/g |
1 |
1 |
1 |
4 LAN 1 WAN |
- |
5V / 3A |
OEM'd to Verizon, FIOS port will not work |
v.24 sp2 - build 12646 - 13/08/09 |
MI424WR |
MI424WR |
D |
LNQ802MAG |
Xscale IXP425@533 |
32 |
8 |
dependy on card |
b/g |
1 |
1 |
- |
4 LAN 1 WAN |
- |
5V / 3A |
OEM'd to Verizon, FIOS port will not work |
v.24 sp2 - build 12646 - 13/08/09 |
MI424WR |
Model |
H.W. rev |
FCC ID |
Platform & Frequency [MHz] |
RAM [MB] |
Flash [MB] |
WLAN NIC |
WLAN standard [802.11] |
mini PCI |
Serial port |
JTAG port |
Eth. port count |
PoE |
Volt. Input [V/A] |
Special Features Notes |
min required DD-WRT version |
Notes for Running DD-WRT |
Coyote |
- |
? |
Xscale IXP425@533 |
64- 128 |
16- 32 |
- |
depends on card |
2 |
1 |
1 |
4 LAN 1 WAN |
? |
? |
hardware watch dog, temp. and volt. sensor, opt adsl annex a-c, usb 1.1, pata, 2x pots |
v24 RC5 - kernel support |
board donation needed for port |
Pronghorn SBC 210 |
- |
? |
Xscale IXP420@266 |
32 |
8 |
- |
depends on card |
2 |
1 |
? |
1 LAN |
802.3af |
5, 10- 30 |
Compact Flash socket, hardware watch dog, temp. and volt. sensor |
v24 pronghorn-SBC - Build 9917 |
needs activation |
Pronghorn Metro SBC |
- |
? |
Xscale IXP425@533 |
64 |
16 |
- |
depends on card |
4 |
1 |
? |
1 LAN, 1 WAN |
yes |
17- 30 & 36- 60 |
Compact Flash socket, hardware watch dog, temp. and volt. sensor |
v24 pronghorn-SBC - Build 9917 |
needs activation |
Model |
H.W. rev |
FCC ID |
Platform & Frequency [MHz] |
RAM [MB] |
Flash [MB] |
Wireless NIC |
WLAN standard [802.11] |
mini PCI |
Serial port |
JTAG port |
Eth. port count |
PoE |
Volt. Input [V/A] |
Special Features Notes |
min required DD-WRT version |
Notes for Running DD-WRT |
AR335W |
? |
RRK-AR335W |
Atheros AR2317@182 |
16 |
4 |
Atheros |
b/g |
- |
? |
1 |
4 LAN 1 WAN |
- |
5V / 1.2A |
clone of dir-300 |
v24 rc5 |
install like dir-300 |
AR430W |
V1 |
RRK-AR430W |
Atheros AR2318@182 |
16 |
4 |
Atheros |
b/g |
- |
1 |
1 |
4 LAN 1 WAN |
- |
12V / 1A 5V / 1A auto- sensed |
clone of dir-300 |
V24 RC5 |
[1] |
AP431W |
? |
RRK-AP431W |
Atheros AR2313A@180 |
16 |
4 |
Atheros |
b/g |
- |
1 |
1 |
1LAN |
- |
12V / 1A |
DWL 2100 clone, but running redboot? |
V24 RC5? wip |
|
AR670W |
? |
RRK-WRGN16 |
Ralink RT2880F@266 |
32 |
4 |
Ralink RT2820L |
b/g/n |
has pads |
1 |
1 |
4 LAN 1 WAN |
- |
5V / 2A |
- |
v24 Pre sp2 - build 12861 |
|
AR690W |
? |
RRK-WRGN20 |
Ralink RT2880F@266 |
32 |
4 |
Ralink RT2820L |
b/g/n |
- |
1 |
? |
4 LAN 1 WAN |
- |
5V / 3A |
GBit switch |
v24 Pre sp2 - build 15695 |
|
Model |
H.W. rev |
FCC ID |
Platform & Freq. [MHz] |
RAM [MB] |
Flash [MB] |
Wireless NIC |
WLAN standard [802.11] |
mini PCI |
Serial port |
JTAG port |
Eth. port count |
PoE |
Volt. Input [V/A] |
Special Features Notes |
min required DD-WRT version |
Notes for Running DD-WRT |
Airmax 5 |
? |
? |
Atheros AR2312@180? |
32 |
8 |
Atheros AR5112A SoC? |
a/b/g/n @ 20dBm? |
? |
1? |
? |
2 LAN? 1 WAN |
802.3af? |
5V 2A? |
outdoor encl. w. 14dBi dual pol ant. |
v.24 sp2 - build 11803 |
activation needed |
WHA-5500CPE |
? |
? |
Atheros AR2312@180 |
32 |
4 |
Atheros AR5112A SoC |
a/b/g/h @ 20dBm |
? |
1 |
? |
2 LAN 1 WAN |
802.3af |
5V 2A |
outdoor encl. w. 18dBi ant. |
wha- 5500cpe v.24 rc7 - build 9414 |
activation needed |
WHA-5500CPE-NT |
? |
? |
Atheros AR2312@180 |
32 |
4 |
Atheros AR5112A SoC |
a/b/g/h @ 20dBm |
? |
1 |
? |
1 LAN WAN |
802.3af |
5V 2A |
outdoor encl. |
wha- 5500cpe v.24 rc7 - build 9414 |
activation needed |
WLA-5000 |
? |
? |
Atheros AR2312@180 |
32 |
4 |
Atheros AR5112A SoC |
a/b/g/h @ 20dBm |
? |
1 |
? |
1 LAN WAN |
802.3af |
5V 2A |
- |
WLA- 5000ap v.24 rc7 - build 9414 |
activation needed |
WLA-9000ap |
? |
? |
Atheros AR5312@220 |
32 |
8 |
Atheros |
a/b/g @ 23dBm |
? |
1 |
? |
2 LAN 1 WAN |
802.3af |
5.5V 2.5A |
- |
WLA- 9000ap v.24 SP2 - build 11003 |
activation needed |
Model |
H.W. rev |
FCC ID |
Platform & Frequency [MHz] |
RAM [MB] |
Flash [MB] |
Wireless NIC |
WLAN standard [802.11] |
mini PCI |
Serial port |
JTAG port |
Eth. port count |
PoE |
Volt. Input [V/A] |
Special Features Notes |
min required DD-WRT version |
Notes for Running DD-WRT |
Solo48 (AP48) |
? |
? |
Atheros AR2313@180 |
32 |
8 |
Atheros |
a/b/g/h @ 30dBm |
? |
1 |
? |
2 WAN LAN |
passive poe |
18 |
outdoor enclosure w. dual pol. 18dBi panel |
alfa v.24 SP2 - build |
activation needed |
AIP-W502U |
? |
? |
Atheros AR9130@400 ? |
32? |
8? |
Atheros AR9102 2x2 MIMO? |
b/g/n? |
- |
Yes |
Yes |
4 LAN 1 WAN |
- |
12 1 |
USB |
W502U v.24 SP2 - build 13845 - 20100206 |
|
Model |
H.W. rev |
FCC ID |
Platform & Frequency [MHz] |
RAM [MB] |
Flash [MB] |
Wireless NIC |
WLAN standard [802.11] |
mini PCI |
Serial port |
JTAG port |
Eth. port count |
PoE |
Volt. Input [V/A] |
Special Features Notes |
min required DD-WRT version |
Notes for Running DD-WRT |
ALL0258 |
- |
- |
Atheros AR2313@180 |
32 |
8 |
1 |
AR5112 a/b/g @ 28dbm |
- |
1 |
? |
1 LAN |
yes |
12V 1A |
Int. 5dBi 2.4GHz + 13dBi 5GHz Panel Ant. + 2x Ext. SMA |
EOC-5610 v.24 SP2 - build 11772 |
EOC-5610 clone, needs DD-WRT activation, install micro-redboot 1st |
All0277 |
- |
F5T 54G0700 ? |
Broadcom BCM4702@125 |
16 |
4 |
Broadcom |
b/g |
1 |
- |
yes |
4 LAN 1 WAN |
- |
5V |
same hardware as wrt54g v1 |
v22 |
? |
All0285 |
? |
? |
Atheros 2312a@180 |
16 |
4 |
Atheros |
b/g |
- |
1 |
1 |
1 LAN |
- |
5V 1.2A |
same hardware as dwl2100 |
WIP |
? |
ALL02762 |
- |
- |
Broadcom BCM5354@240 |
16 |
4 |
1 |
b/g |
- |
- |
1 |
4 LAN 1 WAN |
- |
5V |
|
v.24 SP2 - build 10411 - 20080919 |
ships with pre- installed DD-WRT |
ALL391AP |
- |
? |
Xscale IXP420@266 |
32 |
8 |
Atheros |
1x a/b/g/n |
4 |
1 |
Yes |
1 LAN 1 WAN |
yes |
9- 48 |
h.w. watchdog, temp. and volt. sensor, usb, outdoor encl. |
v24 - avila build |
needs DD-WRT activation |
ALL392BR |
- |
? |
Xscale IXP420@266 |
32 |
8 |
Atheros |
2x a/n @ 30dBm |
4 |
1 |
Yes |
1 LAN 1 WAN |
yes |
9- 48 |
h.w. watchdog, temp. and volt. sensor, usb, outdoor encl. |
v24 - avila build |
needs DD-WRT activation |
ALL392MAP |
- |
? |
Xscale IXP420@266 |
32 |
8 |
Atheros |
1x a/n @ 30dBm, 1x a/b/g/n |
4 |
1 |
Yes |
1 LAN 1 WAN |
yes |
9- 48 |
h.w. watchdog, temp. and volt. sensor, usb, outdoor encl. |
v24 - avila build |
needs DD-WRT activation |
ALL392MRAP |
- |
? |
Xscale IXP420@400 |
32 |
8 |
Atheros |
2x a/n @ 30dBm |
4 |
1 |
Yes |
1 LAN 1 WAN |
yes |
9- 48 |
h.w. watchdog, temp. and volt. sensor, usb, outdoor encl. |
v24 - avila build |
needs DD-WRT activation |
[edit] Anaptyx
Model |
H.W. rev |
FCC ID |
Platform & Frequency [MHz] |
RAM [MB] |
Flash [MB] |
Wireless NIC |
WLAN standard [802.11] |
mini PCI |
Serial port |
JTAG port |
Eth. port count |
PoE |
Volt. Input [V/A] |
Special Features Notes |
min required DD-WRT version |
Notes for Running DD-WRT |
ID-2 |
- |
|
Atheros AR710@680 |
64 |
16 |
- |
2x a/b/g/h |
3 |
1 |
yes |
3 LAN WAN |
yes |
5- 24 |
= UBNT RouterStation |
RS v24SP2 - build 10907 |
needs DD-WRT activation |
OD-2 |
- |
|
Atheros AR710@680 |
64 |
16 |
- |
2x a/b/g/h |
3 |
1 |
yes |
3 LAN WAN |
yes |
5- 24 |
= UBNT RouterStation w. outdoor enclosure |
RS v24SP2 - build 10907 |
needs DD-WRT activation |
OMW |
- |
|
Atheros AR710@680 |
64 |
16 |
- |
depends on card |
3 |
1 |
yes |
3 LAN WAN |
yes |
5- 24 |
= UBNT RouterStation |
RS v24SP2 - build 10907 |
needs DD-WRT activation |
AWR-100 |
- |
|
Atheros AR710@680 |
64 |
16 |
- |
depends on card |
3 |
1 |
yes |
3 LAN WAN |
yes |
5- 24 |
= UBNT RouterStation |
RS v24SP2 - build 10907 |
needs DD-WRT activation |
Model |
H.W. rev |
Platform & Frequency [MHz] |
RAM [MB] |
Flash [MB] |
Wireless NIC |
WLAN standard [802.11] |
mini PCI |
Serial port |
JTAG port |
Eth. port count |
PoE |
Volt. Input [V] |
Special Features Notes |
min required DD-WRT version |
Notes for Running DD-WRT |
MaxR-7300 |
- |
Atheros AR7161@680 |
64 |
8 |
- |
depends on card |
3 |
1 |
1 |
4 LAN 1 WAN |
yes |
8- 12V & 9- 48V |
hw watchdog, 2 usb |
|
|
MaxR-7200 |
- |
Atheros AR7161@680 |
64 |
8 |
- |
depends on card |
2 |
1 |
1 |
4 LAN 1 WAN |
yes |
8- 12V & 9- 48V |
hw watchdog, 2 usb |
|
|
MaxR-7100 |
- |
Atheros AR7130@300 |
32 |
8 |
- |
depends on card |
1 |
1 |
1 |
2 LAN WAN |
yes |
12 - 18V |
hw watchdog, temp, 2 usb |
|
|
Model |
H.W. rev |
FCC ID |
Platform & Frequency [MHz] |
RAM [MB] |
Flash [MB] |
Wireless NIC |
WLAN standard [802.11] |
mini PCI |
Serial port |
JTAG port |
Eth. port count |
Volt. Input [V/A] |
Special Features Notes |
min required DD-WRT version |
Notes for Running DD-WRT |
RT210W |
- |
H8N-RT210W |
Broadcom BCM4710@125 |
16 |
4 |
Broadcom |
b/g |
1 |
- |
? |
4 LAN 1 WAN |
5V 2A |
same hw: Gigaset SE505 v1 |
v23? |
initial flash: use Tftp flash |
RT220XD |
- |
? |
Broadcom ? @ ? |
16? |
4? |
Broadcom |
b/g ? |
? |
- |
? |
4? |
? |
? |
v.24 rc7 - build 9364 |
initial flash: use Tftp flash |
RT480W |
- |
H8NRT480W |
Broadcom BCM4712@200 |
8 |
4 |
Broadcom |
b/g |
? |
? |
? |
4 LAN 1 WAN |
12V 1A |
? |
v24 micro |
initial flash: use Tftp flash |
RT2100W? |
- |
RT2100W-D65 |
Broadcom @ ? |
? |
? |
Broadcom |
b/g |
? |
? |
? |
? |
? |
? |
v24 |
initial flash: use Tftp flash |
RT2206D? |
- |
RT2206D-D56 |
Broadcom @ ? |
? |
? |
Broadcom |
b/g |
? |
? |
? |
? |
? |
? |
v24 |
initial flash: use Tftp flash |
WARNING: It is recommended to use ASUS Firmware restoration tool for ASUS routers initial flash (use *.TRX file)
Model |
H.W. rev |
FCC ID |
Platform & Frequency [MHz] |
RAM [MB] |
Flash [MB] |
Wireless NIC |
WLAN standard [802.11] |
mini PCI |
Serial port |
JTAG port |
Eth. port count |
Volt. Input [V/A] |
Special Features Notes |
min required DD-WRT version |
Notes for Running DD-WRT |
RT-G32 |
A |
MSQRTG32 |
Atheros AR2317@180 |
16 |
4 |
Atheros |
b/g |
- |
? |
1 |
4 LAN 1 WAN |
12V 1A |
|
v24 SP2 - build 13499 - 20091222 |
- |
RT-G32 |
B1 |
MSQ-RTG32 |
Ralink RT3052@380 |
16 |
4 |
Ralink |
b/g/n |
- |
1 |
- |
4 LAN 1 WAN |
12V 1A |
|
wip |
- |
RT-N10 |
- |
MSQ-RTN10 |
Broadcom BCM5356@300 |
16 |
4 |
Broadcom |
b/g/n |
- |
Yes |
Yes |
4 LAN 1 WAN |
9V 1A |
|
v24 SP2 - build 13661 - 20100118 |
need to put tx rx antenna to right for wireless to work, still unstable |
RT-N10+ |
? |
MSQ-RTN10?? |
Atheros AR7240@400 |
32 |
4 |
Atheros AR?? |
b/g/n |
- |
1 |
1 |
4 LAN 1 WAN (Gb) |
- |
|
v24sp2 v15429 20101011 |
|
RT-N12 |
- |
MSQ-RTN12 |
Broadcom BCM4716@300 |
32 |
4 |
Broadcom |
b/g/n |
- |
Yes |
Yes |
4 LAN 1 WAN |
12V 1A |
|
v.24SP2 - build 13480 - 20091217 |
|
RT-N13 |
- |
MSQ-RTN13 |
Ralink RT2880@266 |
32 |
4 |
Ralink |
b/g/n |
- |
yes |
- |
4 LAN 1 WAN |
5 |
|
board needed for port -> pm Sash |
|
RT-N13U |
- |
MSQ-RTN13U |
Ralink RT3052@380 |
32 |
4 |
Ralink |
b/g/n |
- |
yes |
- |
4 LAN 1 WAN |
12 |
1 USB 2.0 |
v.24 SP2 - build 14594 - 20100612 |
ext3 addon to run optware |
RT-N13U |
B |
MSQ-RTN13U |
Ralink RT3052@380 |
64 |
8 |
Ralink |
b/g/n |
- |
yes |
- |
4 LAN 1 WAN |
12 |
1 USB 2.0 |
? |
|
RT-N15 |
- |
MSQ-RTN15 |
Ralink RT2880@266 |
32 |
4 |
Ralink |
b/g/n |
- |
Yes |
- |
4 GBit LAN 1 GBit WAN |
5 |
|
board needed for port -> pm Sash |
|
RT-N16 |
- |
MSQRTN16 |
Broadcom BCM4718@480 |
128 |
32 |
Broadcom |
b/g/n |
- |
Yes |
Yes |
4 GBit LAN 1 GBit WAN |
12V 1.25A |
2 USB 2.0 |
v24 sp2 - build 13297 |
for initial flash Asus RT-N16 now supported |
WL-300g |
- |
MSQWL300G |
Broadcom BCM4710@125 |
16 |
4 |
Broadcom |
b/g |
- |
- |
? |
1 LAN |
5V 2A |
|
v24 |
initial flash via Asus tool,
VINTage firmware needed. |
WL-330gE |
- |
MSQWL330GE |
Broadcom BCM5354r2@240 |
16 |
4 |
Broadcom |
b/g |
1 |
- |
? |
1 LAN |
5V 1A |
|
dd-wrt.v24 - 10633 - NEWD - mini.bin |
initial flash via Asus tool,
[2] needed. |
WL-500b |
- |
MSQWL500B |
Broadcom BCM4710@125 |
16 |
4 |
Broadcom |
b (maybe wlan must be replaced to work) |
1 |
- |
1 |
4 LAN 1 WAN |
5V 2A |
1 USB 1 LPT |
v23 SP2 |
initial flash via Asus tool |
WL-500g |
- |
MSQWL500G |
Broadcom BCM4710@125 |
16 |
4 |
Broadcom |
b/g |
1 |
- |
1 |
4 LAN 1 WAN |
5V 2A |
1 USB 1 LPT |
v23 SP2 |
initial flash via Asus tool |
WL-500g Deluxe |
- |
MSQWL500GD |
Broadcom BCM5365@200 |
32 |
4 |
Broadcom |
b/g |
- |
1 |
? |
4 LAN 1 WAN |
5V 2A |
2 USB 2.0 |
v23 SP2 |
initial flash via Asus tool, tftp, or web interface |
WL-500gP |
- |
MSQWL500GP |
Broadcom BCM4704@264 |
32 |
8 |
Broadcom |
b/g |
1 |
1 |
? |
4 LAN 1 WAN |
5V 2.5A |
2 USB |
v23 SP3 |
initial flash via Asus tool |
WL-500gP V2 |
v2 |
MSQWL500GP V2 |
Broadcom BCM5354@240 |
32 |
8 |
Broadcom |
b/g |
- |
1 |
? |
4 LAN 1 WAN |
5V 2.5A |
2 USB |
v24 rc7 - build 9264 |
initial flash via Asus tool; or via tftp |
WL-500W |
- |
MSQWL500W |
Broadcom BCM4704@264 |
32 |
8 |
Broadcom |
b/g/n |
1 |
1 |
No |
4 LAN 1 WAN |
5V 2.5A |
2 USB |
v24 RC3 |
initial flash via Asus tool |
WL-520g |
- |
MSQWL520G |
Broadcom BCM5350@200 |
8 |
2 |
Broadcom |
b/g |
? |
Yes |
? |
4 LAN 1 WAN |
9V 0.8A |
|
V24-SP1 micro |
initial flash via web interface |
WL-520gC |
- |
MSQWL520GUGC |
Broadcom BCM5354@240 |
16 |
2 |
Broadcom |
b/g |
? |
- |
? |
4 LAN 1 WAN |
5V 2A |
|
v24 micro build 8257 |
initial flash via Asus tool |
WL-520gU |
- |
MSQWL520GUGC |
Broadcom BCM5354@240 |
16 |
4 |
Broadcom |
b/g |
No |
Yes |
No |
4 LAN 1 WAN |
5V 2A |
1 USB 2.0 |
v24 |
initial flash via Asus tool |
WL-550gE |
- |
MSQWL550GE |
Broadcom BCM5352@200 |
16 |
4 |
Broadcom |
b/g |
? |
- |
- |
4 LAN 1 WAN |
5V 2A |
2 USB 1.1 (Requires soldering header) |
v23 SP2 |
initial flash via Asus tool |
WL-700gE |
? |
? |
Broadcom BCM4780@266 |
64 |
2 |
Broadcom |
b/g |
? |
? |
? |
4 LAN 1 WAN |
12V 3A Max |
3 USB 2.0, 3.5" 250 GB internal hard drive, possible to use a partition as flash memory |
? |
? |
WARNING: Always use TFTP to flash Belkin routers if at all possible! Upgrading dd-wrt from the web interface can lead to a bricked (nonfunctional) unit!
Model |
H.W. Rev |
FCC ID |
Platform & Frequency [MHz] |
RAM [MB] |
Flash [MB] |
Wireless NIC |
WLAN Standard [802.11] |
mini PCI |
Serial Port |
JTAG Port |
Eth. Port Count |
Volt. Input [V/A] |
Special Features Notes |
Min Required DD-WRT Ver |
DD-WRT Install Notes |
F5D7130 |
- |
K7SF5D7130 |
Broadcom BCM4710@125 |
? |
2 |
Broadcom |
b/g |
- |
? |
? |
? |
- |
? |
micro |
? |
F5D7130 |
2001 |
K7SF5D7130A |
Broadcom BCM4710@125 |
8 |
2 |
Broadcom |
b/g |
- |
? |
? |
1 WAN |
5V 2A |
? |
v24 SP1 micro |
Used TFtp Flash via Mac OSX Terminal instructions. |
F5D7130-4 |
1010 |
QDS-BRCM1005 |
Broadcom BCM4710@125 |
8 |
2 |
Broadcom |
b/g |
- |
? |
? |
? |
? |
must use VINT build |
v24 rc4 micro |
initial flash: use Tftp flash |
F5D7130-4 |
1112 |
QDS-BRCM1005 |
Broadcom BCM4710@125 |
8 |
2 |
Broadcom |
b/g |
- |
? |
? |
? |
5V 2A |
Must use VINT build |
v24 VINT micro |
always use Tftp flash |
F5D7130 |
2115uk |
K7SF5D7130A |
Broadcom BCM4710@125 |
8 |
2 |
Broadcom |
b/g |
no |
no |
1 |
1 |
5v 2A |
built in bootloader |
micro |
perfect with Tftp flash |
F5D7130 |
3000ef 3002uk |
K7SF5D7130A |
Broadcom BCM4712@200 |
8 |
2 |
Broadcom |
b/g |
no |
no |
1 |
1 |
5v 2A |
built in bootloader |
micro |
perfect with Tftp flash |
F5D7230-4 |
1000 1010 1111 1112 1222de 1223df 1223ef 1232a |
H8N-RT210W (1000), QDS-BRCM1005 (1112 1223ef 1232a) |
Broadcom BCM4710@125 |
16 |
4 |
Broadcom mini PCI |
b/g |
- |
1 |
1 |
4 LAN 1 WAN |
5V 2A |
Must use VINT build (same hw as Gigaset SE505 v1) |
v23 SP1 (only micro or mini will work) |
always use Tftp flash
see also TFTP Flashing a Belkin F5D7230 see also Firmware must be less than 3.5 MB |
F5D7230-4 |
1000fr 1444 2000df |
K7SF5D7230-4 |
Broadcom BCM4712@200 |
8 |
2 |
Broadcom |
b/g |
yes |
1 |
1 |
4 LAN 1 WAN |
5V 2A |
USB 1.1 mod |
v23 sp2 micro |
always use Tftp flash |
F5D7230-4 |
2000 2000de |
K7SF5D7234A (v2000) |
Broadcom BCM4712@200 |
8 |
2 |
Broadcom |
b/g |
- |
1 |
1 |
4 LAN 1 WAN |
5V 2A |
USB 1.1 mod, "serial flash" device, Must use SF build |
v24 RC4 micro |
v2000 specific: Important Notes |
F5D7230-4 |
3000 |
PD5F5D72304 |
Broadcom BCM5350@200 |
8 |
2 |
Broadcom |
b/g |
- |
1? |
1? |
4 LAN 1 WAN |
7.5V 1A |
? |
v.24 - build 10018 |
initial flash: use Tftp flash |
F5D7231-4 |
1000df 1000ef |
? |
Broadcom BCM5352@200 |
8 |
2 |
Broadcom |
b/g |
- |
? |
? |
4 LAN 1 WAN |
5V 2A |
- |
v24 RC4 micro |
initial flash: use Tftp flash |
F5D7231-4 |
1001 |
K7SF5D72304 |
Broadcom ? @ ? |
8 |
2? |
Broadcom |
b/g |
- |
? |
? |
4 LAN 1 WAN |
5V 2A? |
read this
and this |
v24 RC-5 (11/22/07) micro |
initial flash: use Tftp flash |
F5D7231-4 |
1102 1103ee 1103uk |
K7SF5D7234A |
Broadcom BCM4712@200 |
8 |
2 |
Broadcom |
b/g |
- |
1 |
1 |
4 LAN 1 WAN |
5V 2A |
USB 1.1 mod, "serial flash" device, Must use SF build |
v24 RC4 micro |
initial flash: use Tftp flash |
F5D7231-4 |
1212UK (seems the same as 1213) |
H8NRT2406W |
Broadcom BCM5352@200 |
8 |
2 |
Broadcom |
b/g |
- |
? |
? |
4 LAN 1 WAN |
5V 2A |
- |
v24 RC4 micro |
initial flash: use Tftp flash |
F5D7231-4 |
2000 2001yy 2001df |
K7SF5D7231B |
Broadcom BCM5352@200 |
8 |
2 |
Broadcom |
b/g |
- |
1 |
1 |
4 LAN 1 WAN |
5V 2A |
- |
v24 preSP2 svn 11546 micro |
initial flash: use Tftp flash |
F5D7231-4P |
1000 |
K7SF5D7231P |
Broadcom BCM4712@200 |
16 |
2 |
Broadcom |
b/g |
- |
- |
- |
4 LAN 1 WAN |
5V 2A |
USB port |
- |
initial flash: use Tftp flash |
F5D7330 |
- |
K7SF5D7130A |
Broadcom BCM4710@125 |
8 |
2 |
Broadcom |
b/g |
- |
? |
? |
? |
? |
- |
micro |
initial flash: use Tftp flash |
F5D7234 |
v5 |
K7SF5D7234v5 |
Broadcom BCM5355@ ? |
8 |
2 |
Broadcom |
b/g |
- |
- |
1 |
4 LAN 1 WAN |
5V 2A |
- |
- |
- |
F5D8230-4 |
1001ea |
SA3- AGN 0901 AP0100 |
Broadcom BCM4704@300 |
16 |
4 |
Airgo (must replace mini-pci card with broadcom or other compatible card) |
b/g |
1 |
1 |
1 |
4LAN 1 WAN |
5- 12V 2A |
- |
v.24 rc7 - build 9360 |
initial flash: use Tftp flash |
F5D8232-4 |
1000 1021uk |
K7SF5D8232-4 |
Atheros AR7141@300 |
16 |
8 |
Atheros |
b/g/n |
- |
1? |
1? |
4 Gb LAN 1 WAN |
12v 1.4A |
3" monochrome LCD screen on front. |
v.24 WIP |
development in progress |
F5D8235-4 |
v2 |
K7SF5D8235-4B |
Ralink RT3052F@380 |
32 |
8 |
SOC |
b/g/n |
- |
1 |
- |
4 Gb LAN 1 WAN |
12v 1.5A |
USB 2.0 |
|
- |
F5D8235-4 |
v3 |
K7SF5D8235v3 |
Broadcom BCM4718@480 |
32 |
8 |
SOC |
b/g/n |
- |
1 |
1 |
4 Gb LAN 1 WAN |
12v 1.4A |
USB 2.0 |
WIP |
- |
F7D3301 |
v1 "Share Max" |
K7SF7D3301V1 |
Broadcom BCM4718@480 |
64 |
8 |
SOC |
b/g/n |
- |
1 |
1 |
4 GB LAN 1 WAN |
12v 1.5A |
2x USB 2.0 |
v24 SP2 K2.6 15337 |
- |
F7D3302 |
v1 "Share" |
K7SF7D3302V1 |
Broadcom BCM4718@480 |
64 |
8 |
SOC |
b/g/n |
- |
1 |
1 |
4 LAN 1 WAN |
12v 1.5A |
1x USB 2.0 |
v24 SP2 K2.6 15337 |
- |
F7D4301 |
v1 "Play Max" |
K7SF7D4301V1 |
Broadcom BCM4718@480 |
64 |
8 |
BCM 43224 |
a/b/g/n |
- |
1 |
1 |
4 GB LAN + 1 GB WAN |
12v 1.5A |
2x USB 2.0 |
v24 SP2 K2.6 15030 |
better use CFE mini Web Server for first flash. |
F7D4302 |
v1 "Play" |
K7SF7D4302V1 |
Broadcom BCM4718@480 |
64 |
8 |
BCM 43224 |
a/b/g/n |
- |
1 |
1 |
4 LAN + 1 WAN |
12v 1.5A |
1x USB 2.0 |
v24 SP2 K2.6 15230 |
better use CFE mini Web Server for first flash. |
Model |
H.W. rev |
FCC ID |
Platform & Frequency [MHz] |
RAM [MB] |
Flash [MB] |
Wireless NIC |
WLAN standard [802.11] |
mini PCI |
Serial port |
JTAG port |
Eth. port count |
PoE |
Volt. Input [V/A] |
Special Features Notes |
min required DD-WRT version |
Notes for Running DD-WRT |
BWRG500 |
- |
TDK-BWRG500 |
Atheros AR2316A@180 |
16 |
4 |
Atheros @ 26dBm |
b/g |
- |
1 |
yes |
4 LAN 1 WAN |
|
5V/4A |
=bwrg1000 |
bwrg 1000 build v.24 sp2 - build 11803 |
needs activation |
BWRG1000 |
- |
TDK-BWR54G1 |
Atheros AR2316A@180 |
16 |
4 |
Atheros @ 29dBm |
b/g |
- |
1 |
yes |
4 LAN 1 WAN |
|
5V/4A |
- |
bwrg 1000 build v.24 sp2 - build 11803 |
needs activation |
Model |
H.W. rev |
FCC ID |
Platform & Frequency [MHz] |
RAM [MB] |
Flash [MB] |
Wireless NIC |
WLAN standard [802.11] |
mini PCI |
Serial port |
JTAG port |
Eth. port count |
PoE |
Volt. Input [V/A] |
Special Features Notes |
min required DD-WRT version |
Notes for Running DD-WRT |
BW1251 |
- |
MXF-A950806AG |
Xscale IXP425@533 |
64 |
16 |
2 |
Atheros AR5213A @ a/b/g |
2 |
1 |
1 |
1 LAN WAN |
802.af |
12V 1A |
? |
? |
board needed for port -> pm Sash |
Model |
H.W. rev |
FCC ID |
Platform & Frequency [MHz] |
RAM [MB] |
Flash [MB] |
Wireless NIC |
WLAN standard [802.11] |
mini PCI |
Serial port |
JTAG port |
Eth. port count |
Volt. Input [V/A] |
Special Features Notes |
min required DD-WRT version |
Notes for Running DD-WRT |
WAPM- HP- AM 54G54 |
- |
? |
Broadcom BCM4704@264 |
64 |
8 |
Broadcom |
a/b/g/h |
- |
1 |
1 |
4 PORT ADM 6996M |
? |
? |
v24 RC5 |
? |
WBR-B11 |
- |
? |
Broadcom BCM4710@125 |
16 |
4 |
Broadcom |
b/g |
1 |
1 |
1 |
4 LAN 1 WAN |
3,3V 2A |
- |
v23 SP2 |
Use ddadder with "wbr-g54" as model name. WLAN does not work due to lack of driver. |
WBR-G54 |
- |
? |
Broadcom BCM4710@125 |
16 |
4 |
Broadcom |
b/g |
1 |
1 |
1 |
4 LAN 1 WAN |
3,3V 2A |
- |
v23 SP2, only VINT for >=v.24 |
initial flash: use ddadder or Tftp_flash |
WBR2-G54 |
- |
FDI-04600142-0 |
Broadcom BCM4712@200 |
16 |
4 |
Broadcom |
b/g |
- |
- |
? |
4 LAN 1 WAN |
3,3V 2A |
- |
v23 SP2 |
initial flash: use ddadder or Tftp_flash |
WBR2-G54S |
- |
FDI-04600142-0 |
Broadcom BCM4712@200 |
16 |
4 |
Broadcom |
b/g |
- |
- |
? |
4 LAN 1 WAN |
3,3V 2A |
- |
v23 SP2 |
initial flash: use ddadder or Tftp_flash |
WHR-G54S |
- |
FDI-04600264-0 |
Broadcom BCM5352@200 |
16 |
4 |
Broadcom |
b/g |
- |
1 |
1 |
4 LAN 1 WAN |
3.3V 2A |
- |
v23 SP2 |
initial flash: use Tftp_flash |
WHR-G125 |
- |
FDI-09101584-0 |
Broadcom BCM5354@240 |
16 |
4 |
Broadcom |
b/g |
- |
1 |
1 |
4 LAN 1 WAN |
3.3V 2A |
- |
v24 - build 2007 - 0516 |
initial flash: use Tftp_flash |
WHR-G300N |
v1 |
FDI-09101538-0 |
Ralink RT3052F@384 |
32 |
4 |
Ralink |
b/g/n |
- |
1 |
? |
4 LAN 1 WAN |
12V 2A |
- |
v24 SP2 |
WHR-G300N |
WHR-G300N |
v2 |
FDI-09101561-0 |
Atheros AR7240@400 |
32 |
4 |
Atheros AR9283 |
b/g/n |
- |
1 |
? |
4 LAN 1 WAN |
12V 1A |
- |
v24 SP2 - build 13744 - 20100126 |
WHR-G300N_V2 |
WHR-HP-AG108 |
? |
FDI-09101540-0 |
Atheros AR5312@220 |
32 |
4 |
Atheros |
a/b/g/h |
- |
1 |
? |
4 LAN 1 WAN |
5V 2A |
- |
v23 SP2 |
only flashable with serial or a telnet backdoor |
WHR-HP-G300N |
? |
FDI-09101621-0 |
Atheros AR7240@400 |
32 |
4 |
Atheros |
b/g/n? |
- |
1 |
? |
4 LAN 1 WAN |
5V 2.3A |
- |
v24 SP2 - build 13406 - 20091207 |
Offical DD-WRT build on buffalo support website |
WHR-AMG54 |
? |
? |
Broadcom BCM5352@200? |
16? |
4 |
Broadcom |
a/b/g |
? |
? |
? |
4 LAN 1 WAN |
? |
- |
v24 sp2 |
use firmware for WHR-HP-G54 |
WHR-HP-G54 |
- |
FDI-09101577-0 |
Broadcom BCM5352@200 |
16 |
4 |
Broadcom |
b/g |
- |
1 |
1 |
4 LAN 1 WAN |
5V 2.6A |
- |
v24 std (05/24/08) - build 9526 |
initial flash: use Tftp_flash |
WHR-HP-G54-DD |
- |
FDI-09101577-0 |
Broadcom BCM5352@200 |
16 |
4 |
Broadcom |
b/g |
- |
1 |
1 |
4 LAN 1 WAN |
5V 2.6A |
- |
v23 SP2 |
ships with pre-installed DD-WRT |
WHR-HP-GN |
? |
FDI-09101567-0 |
Atheros AR7240@400 |
32 |
4 |
Atheros |
b/g/n |
- |
1 |
? |
4 LAN 1 WAN |
5V 2.3A |
- |
v24 SP2 - build 13406 - 20091207 |
|
WHR2-A54G54 |
- |
? |
Broadcom ? @ ? |
16? |
4? |
Broadcom |
b/g? |
- |
? |
? |
4 LAN 1 WAN? |
5V 0.9A? |
- |
v23? |
? |
WHR3-AG54 |
- |
? |
Broadcom BCM4704@264 |
64 |
4 |
Broadcom |
a/b/g |
1 |
1 |
1 |
4 LAN 1 WAN |
3.3V 2A |
AOSS, External Antenna Connector |